[Asterisk-Users] Unicall errors

[Steve Underwood]

Hi Sam,

It looks like you have not set the default signalling bit pattern 
properly in your /etc/zaptel.conf file.

If you are not using unicall-0.0.2pre2, update. This version contains a 
number of important bug fixes.

Regards,
Steve

Sam Njenga wrote:

> If I make a call to asterisk's r2 E1 I get these errors
>  
> *CLI> Jan 10 16:16:38 WARNING[1089170112]: chan_unicall.c:634 
> unicall_error: UniCall: mfcr2 Rx bits 0x1   [1/       1/  0/  0]
> Jan 10 16:16:38 WARNING[1089170112]: chan_unicall.c:634 unicall_error: 
> UniCall: mfcr2 Detected
> Jan 10 16:16:38 WARNING[1089170112]: chan_unicall.c:634 unicall_error: 
> UniCall: mfcr2 Making a new call with CRN 32791
> Jan 10 16:16:38 WARNING[1089170112]: chan_unicall.c:634 unicall_error: 
> UniCall: mfcr2 Tx bits 0xD   [2/       2/101/  0]
> Jan 10 16:16:38 WARNING[1089170112]: chan_unicall.c:2548 
> handle_uc_event: UC event Detected
> Jan 10 16:16:39 WARNING[1089170112]: chan_unicall.c:634 unicall_error: 
> UniCall: mfcr2 Rx bits 0x9   [2/       2/101/  0]
> Jan 10 16:16:39 WARNING[1089170112]: chan_unicall.c:634 unicall_error: 
> UniCall: mfcr2 Far end disconnected - state 0x2
> Jan 10 16:16:39 WARNING[1089170112]: chan_unicall.c:2548 
> handle_uc_event: UC event Far end disconnected
> Jan 10 16:16:39 WARNING[1089170112]: chan_unicall.c:2854 
> handle_uc_event: Far disconnect cause 31
> Jan 10 16:16:39 WARNING[1089170112]: chan_unicall.c:634 unicall_error: 
> UniCall: mfcr2 mfcr2_DropCall()
> Jan 10 16:16:39 WARNING[1089170112]: chan_unicall.c:634 unicall_error: 
> UniCall: mfcr2 Call disconnected - state 0x800
> Jan 10 16:16:39 WARNING[1089170112]: chan_unicall.c:2548 
> handle_uc_event: UC event Drop call
> Jan 10 16:16:39 WARNING[1089170112]: chan_unicall.c:2892 
> handle_uc_event: Doing a uc_ReleaseCall
> Jan 10 16:16:39 WARNING[1089170112]: chan_unicall.c:634 unicall_error: 
> UniCall: mfcr2 mfcr2_ReleaseCall()
> Jan 10 16:16:39 WARNING[1089170112]: chan_unicall.c:634 unicall_error: 
> UniCall: mfcr2 Tx bits 0x9   [1/    1000/106/  0]
> Jan 10 16:16:39 WARNING[1089170112]: chan_unicall.c:634 unicall_error: 
> UniCall: mfcr2 Destroying call with CRN 32791
> Jan 10 16:16:39 WARNING[1089170112]: chan_unicall.c:634 unicall_error: 
> UniCall: mfcr2 release_guard_expired
> Jan 10 16:16:39 WARNING[1089170112]: chan_unicall.c:2548 
> handle_uc_event: UC event Release call
>     -- UC channel 4 released
>  
> I am using channel Unicall compiled without errors on Redhat 9
>  
> /Sam