[Asterisk-Users] Asterisk Demo

[Julien Goodwin]

On Sun, Jan 09, 2005 at 10:51:56PM +0200, Walid Azab arranged a set of bits into the following:
>    Hi,
>     
>    I need to setup a demo for asterisk and need some help here please. The
>    demo is connecting to Asterisk a Cisco 7970 SIP (ver. &.0) and a SIP
Ah, a quick check of the cisco site seems to confirm that the 7970 does
not yet speak SIP, and its varient on SCCP is not yet supported by
asterisk (neither in chan_skinny or chan_sccp). The 7960/40 on the other
hand is supported in both sip and skinny.

If it is I'm sure that a lot of people here would like to hear about it.

>    client on HP iPAQ via a wireless hotspot. I need to configure both with
>    the same extension with a shared line like in Cisco CallManager. This way
>    if the extension is called both iPAQ and the IP phone ring and the user
>    gets to pick up using either.
This bit isn't too hard it's just:
Dial(SIP/nameof7960&SIP/nameofIPAQ)
In the dialplan
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 232 bytes
Desc: not available
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20050110/cac9a669/attachment.pgp