[Asterisk-Users] Multiple lines on Cisco 7960
C F
shmaltz at gmail.com
Sun Jan 9 16:36:43 MST 2005
There should be no quotes after the : in the cisco SIPmacaddress.cnf files.
Change it from:
# Line 1
line1_name: Scott
line1_authname: "scott"
line1_password: "scott"
# Line 2
line2_name: Scott1
line2_authname: "scott1"
line2_password: "scott1"
To:
# Line 1
line1_name: Scott
line1_authname:scott
line1_password:scott
# Line 2
line2_name: Scott1
line2_authname:scott1
line2_password:scott1
this works for me
hope it works for you too.
On Sat, 08 Jan 2005 02:38:00 +0800, Nathan Alberti <na at nathanalberti.com> wrote:
> Theres your problem right there; All of them say line2_X
>
> Nathan.
>
>
> # Line 2
> line2_name: Scott1
> line2_authname: "scott1"
> line2_password: "scott1"
>
> # Line 3
> line2_name: "Line 2"
> line2_authname: "UNPROVISIONED"
> line2_password: "UNPROVISIONED"
>
> # Line 4
> line2_name: "Line 4"
> line2_authname: "UNPROVISIONED"
> line2_password: "UNPROVISIONED"
>
> # Line 5
> line2_name: "Line 5"
> line2_authname: "UNPROVISIONED"
> line2_password: "UNPROVISIONED"
>
> # Line 6
> line2_name: "Line 6"
> line2_authname: "UNPROVISIONED"
> line2_password: "UNPROVISIONED"
>
> Scott Henderson wrote:
>
> > I set this up manually on the phone and it works just fine so config
> > files ... I attached the complete config files so maybe someone can
> > see what I am missing.
> >
> > ============
> > argon:/tftpboot# cat SIPDefault.cnf
> > # SIP Default Generic Configuration File
> >
> > # Image Version
> > image_version: P0S3-07-3-00 ;
> >
> > # Proxy Server
> > proxy1_address: "192.168.17.13" ; Can be dotted IP or FQDN
> > proxy2_address: "192.168.17.13" ; Can be dotted IP or FQDN
> > proxy3_address: "192.168.17.13" ; Can be dotted IP or FQDN
> > proxy4_address: "192.168.17.13" ; Can be dotted IP or FQDN
> > proxy5_address: "192.168.17.13" ; Can be dotted IP or FQDN
> > proxy6_address: "192.168.17.13" ; Can be dotted IP or FQDN
> >
> > # Proxy Server Port (default - 5060)
> > proxy1_port: 5060
> > proxy2_port: 5060
> > proxy3_port: 5060
> > proxy4_port: 5060
> > proxy5_port: 5060
> > proxy6_port: 5060
> >
> > # Proxy Registration (0-disable (default), 1-enable)
> > proxy_register: 1
> >
> > # Phone Registration Expiration [1-3932100 sec] (Default - 3600)
> > timer_register_expires: 3600
> >
> > # Codec for media stream (g711ulaw (default), g711alaw, g729a)
> > preferred_codec: none
> >
> > # TOS bits in media stream [0-5] (Default - 5)
> > tos_media: 5
> >
> > # Inband DTMF Settings (0-disable, 1-enable (default))
> > dtmf_inband: 1
> >
> > # Out of band DTMF Settings (none-disable, avt-avt enable (default),
> > avt_always - always avt )
> > dtmf_outofband: avt
> >
> > # DTMF dB Level Settings (1-6dB down, 2-3db down, 3-nominal (default),
> > 4-3db up, 5-6dB up)
> > dtmf_db_level: 3
> >
> > # SIP Timers
> > timer_t1: 500 ; Default 500 msec
> > timer_t2: 4000 ; Default 4 sec
> > sip_retx: 10 ; Default 10
> > sip_invite_retx: 6 ; Default 6
> > timer_invite_expires: 180 ; Default 180 sec
> >
> > ####### New Parameters added in Release 2.0 #######
> >
> > # Dialplan template (.xml format file relative to the TFTP root directory)
> > dial_template: dialplan
> >
> > # TFTP Phone Specific Configuration File Directory
> > tftp_cfg_dir: "" ; Example: ./sip_phone/
> >
> > # Time Server (There are multiple values and configurations refer to
> > Admin Guide for Specifics)
> > sntp_server: "192.168.17.11" ; SNTP Server IP Address
> > sntp_mode: directedbroadcast ; unicast, multicast, anycast, or
> > directedbroadcast (default)
> > time_zone: YST ; Time Zone Phone is in
> > dst_offset: 1 ; Offset from Phone's time when DST is
> > in effect
> > dst_start_month: April ; Month in which DST starts
> > dst_start_day: "" ; Day of month in which DST starts
> > dst_start_day_of_week: Sun ; Day of week in which DST starts
> > dst_start_week_of_month: 1 ; Week of month in which DST starts
> > dst_start_time: 02 ; Time of day in which DST starts
> > dst_stop_month: Oct ; Month in which DST stops
> > dst_stop_day: "" ; Day of month in which DST stops
> > dst_stop_day_of_week: Sunday ; Day of week in which DST stops
> > dst_stop_week_of_month: 8 ; Week of month in which DST stops
> > 8=last week of month
> > dst_stop_time: 2 ; Time of day in which DST stops
> > dst_auto_adjust: 1 ; Enable(1-Default)/Disable(0) DST
> > automatic adjustment
> > time_format_24hr: 0 ; Enable(1 - 24Hr Default)/Disable(0 -
> > 12Hr)
> >
> > # Do Not Disturb Control (0-off, 1-on, 2-off with no user control,
> > 3-on with no user control)
> > dnd_control: 0 ; Default 0 (Do Not Disturb feature is
> > off)
> >
> > # Caller ID Blocking (0-disbaled, 1-enabled, 2-disabled no user
> > control, 3-enabled no user control)
> > callerid_blocking: 0 ; Default 0 (Disable sending all calls
> > as anonymous)
> >
> > # Anonymous Call Blocking (0-disabled, 1-enabled, 2-disabled no user
> > control, 3-enabled no user control)
> > anonymous_call_block: 0 ; Default 0 (Disable blocking of
> > anonymous calls)
> >
> > # DTMF AVT Payload (Dynamic payload range for AVT tones - 96-127)
> > dtmf_avt_payload: 101 ; Default 101
> >
> > # Sync value of the phone used for remote reset
> > sync: 1 ; Default 1
> >
> > ####### New Parameters added in Release 2.1 #######
> >
> > # Backup Proxy Support
> > proxy_backup: "" ; Dotted IP of Backup Proxy
> > proxy_backup_port: 5060 ; Backup Proxy port (default is 5060)
> >
> > # Emergency Proxy Support
> > proxy_emergency: "" ; Dotted IP of Emergency Proxy
> > proxy_emergency_port: 5060 ; Emergency Proxy port (default is 5060)
> >
> > # Configurable VAD option
> > enable_vad: 0 ; VAD setting 0-disable (Default),
> > 1-enable
> >
> > ####### New Parameters added in Release 2.2 ######
> >
> > # NAT/Firewall Traversal
> > nat_enable: 0 ; 0-Disabled (default), 1-Enabled
> > nat_address: "" ; WAN IP address of NAT box (dotted IP
> > or DNS A record only)
> > voip_control_port: 5060 ; UDP port used for SIP messages
> > (default - 5060)
> > start_media_port: 16384 ; Start RTP range for media (default -
> > 16384)
> > end_media_port: 32766 ; End RTP range for media (default -
> > 32766)
> > nat_received_processing: 0 ; 0-Disabled (default), 1-Enabled
> >
> > # Outbound Proxy Support
> > outbound_proxy: "" ; restricted to dotted IP or DNS A
> > record only
> > outbound_proxy_port: 5060 ; default is 5060
> >
> > ####### New Parameter added in Release 3.0 #######
> >
> > # Allow for the bridge on a 3way call to join remaining parties upon
> > hangup
> > cnf_join_enable : 1 ; 0-Disabled, 1-Enabled (default)
> >
> > ####### New Parameters added in Release 3.1 #######
> >
> > # Allow Transfer to be completed while target phone is still ringing
> > semi_attended_transfer: 1 ; 0-Disabled, 1-Enabled (default)
> >
> > # Telnet Level (enable or disable the ability to telnet into the phone)
> > telnet_level: 1 ; 0-Disabled (default), 1-Enabled,
> > 2-Privileged
> >
> > ####### New Parameters added in Release 4.0 #######
> >
> > # XML URLs
> > services_url: "" ; URL for external Phone Services
> > directory_url: "" ; URL for external Directory location
> > logo_url: "http://192.168.17.11/asterisk-tux.bmp" ; URL for
> > branding logo to be used on phone display
> >
> > # HTTP Proxy Support
> > http_proxy_addr: "" ; Address of HTTP Proxy server
> > http_proxy_port: 80 ; Port of HTTP Proxy Server (80-default)
> >
> > # Dynamic DNS/TFTP Support
> > dyn_dns_addr_1: "" ; restricted to dotted IP
> > dyn_dns_addr_2: "" ; restricted to dotted IP
> > dyn_tftp_addr: "" ; restricted to dotted IP
> >
> > # Remote Party ID
> > remote_party_id: 0 ; 0-Disabled (default), 1-Enabled
> >
> > ####### New Parameters added in Release 4.4 #######
> >
> > # Call Hold Ringback (0-disabled, 1-enabled, 2-disabled no user
> > control, 3-enabled no user control)
> > call_hold_ringback: 0 ; Default 0 (Disable ringback of held
> > call)
> >
> > ========================
> > argon:/tftpboot# cat SIP00115C407FA3.cnf
> > # SIP Configuration Generic File
> >
> > # Line 1
> > line1_name: Scott
> > line1_authname: "scott"
> > line1_password: "scott"
> >
> > # Line 2
> > line2_name: Scott1
> > line2_authname: "scott1"
> > line2_password: "scott1"
> >
> > # Line 3
> > line2_name: "Line 2"
> > line2_authname: "UNPROVISIONED"
> > line2_password: "UNPROVISIONED"
> >
> > # Line 4
> > line2_name: "Line 4"
> > line2_authname: "UNPROVISIONED"
> > line2_password: "UNPROVISIONED"
> >
> > # Line 5
> > line2_name: "Line 5"
> > line2_authname: "UNPROVISIONED"
> > line2_password: "UNPROVISIONED"
> >
> > # Line 6
> > line2_name: "Line 6"
> > line2_authname: "UNPROVISIONED"
> > line2_password: "UNPROVISIONED"
> >
> > ####### New Parameters added in Release 2.0 #######
> >
> > # All user_parameters have been removed
> >
> > # Phone Label (Text desired to be displayed in upper right corner)
> > phone_label: "" ; Has no effect on SIP messaging
> >
> > # Line 1 Display Name (Display name to use for SIP messaging)
> > line1_displayname: "User ID"
> >
> > # Line 2 Display Name (Display name to use for SIP messaging)
> > line2_displayname: "User ID"
> >
> >
> > ####### New Parameters added in Release 3.0 ######
> >
> > # Phone Prompt (The prompt that will be displayed on console and telnet)
> > phone_prompt: "SIP Phone" ; Limited to 15 characters (Default -
> > SIP Phone)
> >
> > # Phone Password (Password to be used for console or telnet login)
> > phone_password: "cisco" ; Limited to 31 characters (Default - cisco)
> >
> > # User classifcation used when Registering [ none(default), phone, ip ]
> > user_info: none
> >
> > messages_uri: "_6101"
> > argon:/tftpboot#
> >
> > Nabeel Jafferali wrote:
> >
> >>>I had not looked at the phones settings yet, thanks for the
> >>>suggestion. The setting indicate that there is no configuration on the
> >>>second line it is listed as "UNPROVISIONED"
> >>>
> >>>
> >>
> >>Go into the phone and program Line 2 Settings directly, without using
> >>the SIP<MAC>.cnf file. If that works, then your .cnf file is wrong.
> >>
> >>
> >>
> >
> >--
> >Scott Henderson
> >============================================================================
> >Finite Technologies Incorporated
> >3763 Image Drive, Anchorage, Alaska 99504
> >Phone: 907.339.8085 ext 6101, Fax: 907.333.4482
> >http://www.finite-tech.com
> >http://www.chillywall.com
> >http://www.virtuale.cc
> >http://www.mphage.com
> >Current Local Time: http://www.worldtimeserver.com/time.asp?locationid=US-AK
> >============================================================================
> >
> >
> >------------------------------------------------------------------------
> >
> >_______________________________________________
> >Asterisk-Users mailing list
> >Asterisk-Users at lists.digium.com
> >http://lists.digium.com/mailman/listinfo/asterisk-users
> >To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
More information about the asterisk-users
mailing list