[Asterisk-Users] capi help please..(capi not installed - No such device or address (6) )

[Clive]

Yay, I got it working.!

I added CAPI verbose reason reporting to the kernel, and modprobed 
as follows:
capi, kernelcapi, divacapi, divas and then loaded divactrl and it works!!, 
yay....now to figure out how to get Asterisk to load with capi...my .conf 
files seem to be wrong

Thanks for everyones help.

regards
Clive


On 9 Jan 2005 at 12:39, Philipp Ebneter wrote:

> Hi Clive,
> 
> I ran into a similar problem: I also have a eicon 4bri and tried to 
> install it on a dell server with redhat as 3.
> The problem I have is that I always got a error message when doing 
> "modprobe capi". The module is compiled in the kernel (it shows up with 
> "lsmod").
> I have not found any solution so far - in the end I had to install 
> asterisk on a different machine. I guess there must be some interrupt 
> problem and maybe this is also the root of your problem.
> 
> regards
> philipp
> 
> Clive wrote:
> 
> >Asterisk wont load because capi wont load. 
> >When I do "capiinfo" I get:
> >capi not installed - No such device or address (6)
> >
> >I have a eicon 4bri card installed, with the patched kernel with the 
> >melware.de files. No irq conflicts., and the dmesg shows this:
> >
> >capifs: Rev 1.1.4.1
> >CAPI-driver Rev 1.1.4.1: loaded
> >capi20: started up with major 68
> >kcapi: capi20 attached
> >capi20: Rev 1.1.4.2: started up with major 68 (middleware+capifs)
> >
> >I have modprobed capi with no error messages.
> >  
> >
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users