[Asterisk-Users] TDM400P - Segmentation fault - Help!

[Andrew Kohlsmith]

On January 7, 2005 07:20 am, Adam Goryachev wrote:

While I agree with you completely with your comments on HTML posting and 
repeating the exact same information over and over, your advice on 
configuration is dead wrong.

> > zaptel.conf
> > fxoks=1-2
> > fxsks=3-4
> >
> > zapata.conf
> > [channels]
> > signalling=fxo_ks
> > channel=1-2
> > signalling=fxs_ks
> > channel=3-4
>
> You have your fxo/fxs confused. zaptel.conf and zapata.conf need to be
> opposite values.

They do??

my zaptel.conf for a TDM430P:
fxols=1-3

my zapata.conf for the same:
signalling=fxo_ls

And his zapata.conf and zaptel.conf look perfectly fine for a 2FXS/2FXO 
TDM400P (in that channel order).

Please, if you're going to give advice on the list at least make an attempt to 
ensure it's accurate.

Cesar - make sure you have /dev/zap and all the files that go with it (i.e. 
make sure you ran "make install" in the zaptel directory.  Also if you'd tell 
us what version of Asterisk you're running it would help a lot.

Also, Cesar, make sure that you have run ztcfg -vvv and make sure the output 
is what you're expecting before running asterisk.  ztcfg sets up the card so 
that Asterisk can see it.

-A.