[Asterisk-Users] TDM400P - Segmentation fault - Help!

[César Davi Ávila do Nascimento]

Hi all,

I'm trying to install a TDM400P card, and I need some help.
Please, see below...

after dmesg command:

[root at voip root]# dmesg
via82cxxx: board #1 at 0xD800, IRQ 5
Zapata Telephony Interface Registered on major 196
PCI: Found IRQ 3 for device 00:09.0
PCI: Sharing IRQ 3 with 00:10.1
Freshmaker version: 71
Freshmaker passed register test
Module 0: Installed -- AUTO FXS/DPO
Module 1: Installed -- AUTO FXS/DPO
Module 2: Installed -- AUTO FXO (FCC mode)
Module 3: Installed -- AUTO FXO (FCC mode)
Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules)

after [root at voip root]# asterisk -vvvvcp command:

 [chan_phone.so] => (Linux Telephony API Support)
  == Parsing '/etc/asterisk/phone.conf': Found
  == Registered channel type 'Phone' (Standard Linux Telephony API Driver)
 [chan_zap.so] => (Zapata Telephony w/PRI)
  == Parsing '/etc/asterisk/zapata.conf': Found
Jan  6 14:57:50 WARNING[-1084944256]: chan_zap.c:665 zt_open: Unable to specify channel 1: No such device or address
Jan  6 14:57:50 ERROR[-1084944256]: chan_zap.c:5340 mkintf: Unable to open channel 1: No such device or address
here = 0, tmp->channel = 1, channel = 1
Jan  6 14:57:50 ERROR[-1084944256]: chan_zap.c:7377 setup_zap: Unable to register channel '1-2'
Jan  6 14:57:50 WARNING[-1084944256]: loader.c:313 ast_load_resource: chan_zap.so: load_module failed, returning -1
  == Unregistered channel type 'Tor'
  == Unregistered channel type 'Zap'
Segmentation fault
[root at voip root]#


Please, see .conf files below:

zaptel.conf

fxoks=1-2
fxsks=3-4
loadzone = us
defaultzone=us

zapata.conf

[channels]
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=3.5
txgain=3.5
immediate=no
busydetect=yes
busycount=5
callprogress=no
usecallerid=yes
hidecallerid=no
;calleridcallwaiting=yes
callerid=asreceived
musiconhold=default
relaxdtmf=yes
accountcode=pstn_local
amaflags=billing
echotraining=yes
context=fxs ;Context to FXS ports
group=1
signalling=fxo_ks
channel=1-2
context=fxo ;Context to FXO ports
group=2
signalling=fxs_ks
channel=3-4

extensions.conf

[fxs]
exten => 100,1,Dial,Zap/1
exten => 100,1,Dial,Zap/2
exten => _9X.,1,Dial,Zap/3/${EXTEN:1}
[fxo]
exten => s,1,Dial,Zap/4


thanks

César
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050107/150297d6/attachment.htm