[Asterisk-Users] Asterisk and Samsung DCS integration

[Alessandro Zummo]

 Hello,

   I'm planning to add Asterisk as VoIP gateway between two 
 existing offices, A and B.

 A has a DCS Compact II PBX with a spare 4BRI card which I plan
 to connect to an ISDN card, probably an EICON Diva Server 4BRI)
 on my VoIP gateway.
 
 The gateway will be connected via IP to the B office's gateway.
 B has a DCS Compact PBX without spare lines.

 To handle this, I thought I may be able to put * between
 the telco and the existing PBX.

 The telco provides the B office with 2 BRIs (T bus from
 the telco, NT1 box and S bus available to the user) which 
 are now connected to the PBX. I would like to connect
 those two S0 BRIs to a a 4BRI ISDN card and then
 connect the card to the PBX with the other two BRIs.

 If something like that doable? can * act as the
 the "telco side"?

 Which card would be best suited for this kind of application?


 If this is doable, and the management approves, I will post
 my configurations and procedures on the Wiki.
 
 Thanks in advance.
 

-- 

 Best regards,

 Alessandro Zummo,
  Tower Technologies - Turin, Italy

  http://www.towertech.it