[Asterisk-Users] Polycom IP500

[Tim Jackson]

Copied your sip.conf and changed the settings and I'm getting the exact
same error. I'm also running 1.3.4 of the SIP app for the IP500. 

Asterisk CVS-v1-0-01/06/05-00:11:36 built by root at asterisk on a i686
running Linux

[channels]
echocancel=yes
echocancelwhenbridged=yes
echotraining=yes
rxgain=2
txgain=2
usecallerid=yes
context=inbound-pots
signalling=fxs_ks
callerid="Unknown Caller" <>
group = 1
channel => 1-2

echocancel=yes
echocancelwhenbridged=yes
echotraining=yes
rxgain=2
txgain=2
usecallerid=yes
context=noawnser
signalling=fxs_ks
callerid="Unknown caller" <>
group = 1
channel => 3-4


-Tim

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Andrei
(MPI)
Sent: Thursday, January 06, 2005 11:08 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Polycom IP500

Tim,

For what it's worth, from my working sip.conf for Polycoms:

[2010]
type=friend
username=usr2010
callerid="MyName" <2010>
secret=nobodyknowswhatitis
host=dynamic
dtmfmode=inband
context=admin
defaultip=192.168.1.10
progressinband=no

Notes:

dtmfmode=inband and progressinband=no - that seems to be recommended 
from * sample sip.conf file for Polycoms.

defaultip= setting helped with network issues, not only with Polycoms, 
with Cisco 7940 as well.

Also in main sip.conf:
[general]
...
disallow=all              ; Allow all codecs
allow=ulaw,alaw

maxexpirey=7200
defaultexpirey=3600
canreinvite=no

Also, if you are not behind NAT, why nat=yes? And if NAT is in use, what

is your network infrastructure?

Also, what is Polycom's SIP firmware version? (mine is 1.3.4 from 
October 2004).

And of course: what is Asterisk and zaptel version? What is your 
zapata.conf (just curious)?

Andrei

Tim Jackson wrote:

>Earlier tonight I moved our * box from an old Compaq w/ 3 X100P clone
>cards to a 1U IBM server with a TDM04B card. I finally got the card
>working in the server, but I'm having issues with these Polycom IP500s
>now. Using the exact same config from the old server I'm getting weird
>errors. Dial a number on the phone and it gives you dialtone but no
user
>interaction (if that makes sense) then after about 35-40 seconds it
>displays "Line used remotely" and hangs up. Inbound calls ring, but you
>can't answer them, registration seems to be ok, but I'm at a loss.
>
>sip.conf:
>[101]
>type=friend
>callerid="Tim Jackson - Home" <101>
>secret=itsasekret
>username=101
>host=dynamic
>dtmfmode=rfc2833
>nat=yes
>canreinvite=no
>context=default
>allow=all
>  
>

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users