[Asterisk-Users] X-lIte behind NAT and Asterisk behind NAT

[Yusuf Alakavuk]

Hi,

First of all you have to configure the  "externip" and "localnet" parameters
at the sip.conf file. You have to write the external ip address of your
internet connection to the extern ip parameter like
"exterip=XXX.YYY.ZZZ.WWW" and your local address for
ex."localnet=192.168.1.0/255.255.255.0" after all you have to configure your
X-lite's network parameters to use your clients external ip address for your
SIP communication. After all it will be working if you have further problems
you can read the documents at the http://www.voip-info.org site by searching
"SIP NAT"





Yusuf Alakavuk
Teknik Danisman - Technical Consultant
 
Grid Bilisim Teknolojileri A.S.
Kustepe Mahallesi Leylak Sokak
Murat Is Merkezi A Blok Kat:2 Daire:9
34387 Sisli Istanbul
Türkiye
Tel  : +90 (212) 336 92 55
Fax : +90 (212) 266 25 50

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of richard
Sent: 05 Ocak 2005 Çarsamba 23:04
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] X-lIte behind NAT and Asterisk behind NAT

Hi,
I have the following scenario.
I have an Asterisk server running on an internal IP address behind a
firewall, and I have a remote user trying to connect to my Asterisk box
behind his firewall, but he can't seem to get a connection.
I have opened up the port (5060) so that he can connect through my firewall,
but it still doesn't appear to want to connect.
I am pretty sure that the firewall rules are correct, because I have also
open up port 21, and he can successfully ssh into my Asterisk box.

Any ideas/pointers?

Thanks in advance

Richard
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users