[Asterisk-Users] Sending DTMF to PSTN problem with SIP

[Dave]

You can configure the gain to be lower on the SPA2000
via the web interface - Ido not remember the exact
location, but you will find it under advanced
settings.

--- CClarke <mordra at hurontel.on.ca> wrote:

> Dear All ~
> 
> I have * setup & running ok (with two Wildcard
> X100P's to PSTN). I also have
> two analog phones connected into same through a
> SIPURA 2000. These work fine,
> except that when I call out through PSTN & try to
> send DTMF tones to (say) a
> remote PBX to dial an extension, the gain seems to
> go wild (high), and the
> DTMF tones are not recognized at the other end.
> 
> I tried setting the SIP2000 to use inband dtmfmode
> (as opposed to auto), and
> likewise in sip.conf, but no success.
> 
> btw, I've also set relaxdtmf=yes in zapata.conf
> since inbound calls sometimes
> seem to have trouble dialling extensions.
> 
> A soft IAX phone (e.g. DIAXPhone) works ok, so I
> suspect my SIP2000/sip.conf
> setup, but can't see what I'm doing wrong.
> 
> Christina.
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> 



		
__________________________________ 
Do you Yahoo!? 
Yahoo! Mail - Find what you need with new enhanced search.
http://info.mail.yahoo.com/mail_250