[Asterisk-Users] (no subject)

[kevin at imagereturn.com]

HELP!

Ok, so I have the following SIP.CONF:

[general]
context=default
port=5060
bindaddr=10.1.1.200
externip = XX.XXX.XX.XX
localnet=10.0.0.0/255.0.0.0
disallow=all
allow=ulaw
allow=g729
allow=g726
allow=alaw

register =>
##########@sip.broadvoice.com:XXXXXXXXX:##########@sip.broadvoice.com/1234

[sip.broadvoice.com]
type=peer
host=sip.broadvoice.com
fromdomain=sip.broadvoice.com
fromuser=##########
context=default
dtmfmode=inband
canreinvite=no
disallow=all
allow=ulaw
allow=g729
allow=g726
allow=alaw

[kevin]
type=friend
regexten=1001
username=kevin
fromuser=Kevin Marvin           ; Specify user to put in "from" instead of
callerid
secret=XXXXXX
host=dynamic
canreinvite=no
defaultip=10.1.1.16
amaflags=default                ; Choices are default, omit, billing,
documentation
dtmfmode=inband

[laptop2]
type=friend
regexten=1005
;username=notebook
fromuser=notebook
secret=XXXXXXX
auth=md5
host=dynamic
qualify=1000
callerid="Notebook" <1005>
disallow=all
allow=gsm
context=default
dtmfmode=inband
reinvite=no
canreinvite=no

[1002]
type=friend
username=1002
secret=XXXX
canreinvite=no
host=dynamic
dtmfmode=rfc2833
mailbox=1002
nat=0


My server, on startup, registers with BV and works great.  Calls come in,
calls go out, life is good.

After about 4 or 5 minutes, however, I cannot get incoming calls.  It
either just rings or goes busy, and never executes the dialplan in
extensions.conf.

I have recompiled, applied the BV patch, all to no avail.  Please help me
understand what I am missing before the wife kills me, which would be very
very bad for my racquetball game.


Thanks,

- Kevin