[Asterisk-Users] Question on behalf of a wannabe new list member

[steve at daviesfam.org]

---------- Forwarded message ----------
Date: Tue, 4 Jan 2005 17:12:32 -0800
From: Bill D'Anjou <danjou at rocketinternet.net>
To: steve at daviesfam.org
Subject: FW: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server

Can you post this to the group for me?  I've joined & I am receiving
e-mails from the group but when I try to post I get a bounce saying
"waiting for admin review - since I'm a non-member."   I would
appreciate it.  I've been watching this topic to see if anything comes
up that applies to my situation.  Apparently Digium is SWAMPED.... I
bought a new card from them & haven't been able to get support for about
a week now.

I have a Dell PowerEdge 6350. The T100P I purchased from Digium works
fine in it, just perfect.  But when I try to install a TE405P, I get a
bunch of errors (no D Chan, etc.).  I'm beginning to think the card is
defective but just wanted to see if anyone on the list might have any
ideas.

Here's the config I'm using:

File: /etc/zaptel.conf
span=1,0,0,esf,b8zs
span=2,0,0,esf,b8zs
span=3,0,0,esf,b8zs
span=4,0,0,esf,b8zs
bchan=1-23
dchan=24
bchan=25-47
dchan=48
bchan=49-71
dchan=72
bchan=73-95
dchan=96

File: /etc/asterisk/zapata.conf
switchtype=national
signalling=pri_net
group=1
channel => 1-23,25-47,49-71,73-95

I am the network side.... sending a PRI to some Quintum gear.

The spans do come up but they generate the errors mentioned above.

Appreciate any/all help.

Thanks,
Bill