[Asterisk-Users] Xorcom Rapid CD for Production?

[Michael Graves]

Hi All,

The past day or so I've setup a new * server based upon the Xorcom
Rapid ISO. It did as promised; wiped the base system, installed Debian
OS, installed Asterisk with a dummy configuration. So far so good.

If I could get the config from my existing * server migrated to the
Xorcom box the I'd be ready to roll. Essentially, it would be the same
as I have now on Fedora Core 1, but with a text mode management shell
and reboots into everything fully working without an user intervention.
I could put a 1 Gb CF card in a CF to IDE adapter and have an HD free
server, or just use a small HD instead.

However, I can't seem to get my current * configs to load to the Xorcom
box. I tried to sftp from my Windows desktop but my Windows ssh/sftp
client (www.privateshell.com) would not connect to the Xorcom box. I
confirmed that sshd was installed and running by trying Putty, as
described in the Xorcom faq. With Putty and its sftp counterpart I
could one-by-one upload the conf files from my existing server to the
Xorcom box, but it killed the * install on the Xorcom box.

Anybody have any experience turning the Xorcom Rapid installation into
a production installation for a small office? It would seem that I only
need to setup the configs appropriately, but something is going
dramatically wrong and I can't see it at the moment.

Michael

--
Michael Graves                           mgraves at pixelpower.com
Sr. Product Specialist                          www.pixelpower.com
Pixel Power Inc.                                 mgraves at mstvp.com

o713-861-4005
o800-905-6412
c713-201-1262