[Asterisk-Users] Conecting to asterisk server through NAT
usingIAX
Bartosz Wegrzyn - asterisk
junk at lexon.ws
Mon Feb 28 19:10:10 MST 2005
I am still having problem with connecting the iax client to my server.
This time I tried firefly. The only config is the ipaddress of the server
username and password.
The entry in the iax.conf looks like this:
[client1]
type=peer
usernamename=client1
secret=test
context=sip
host=dynamic
allow=all
nat =1
This setup does not have any routers. Only simple hubs.
After I try to connect to the server the iax2 debug prints:
Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: REGREQ
Timestamp: 00000ms SCall: 00743 DCall: 00000 [192.168.1.101:4569]
USERNAME : client1
REFRESH : 1800
Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass:
REGAUTH
Timestamp: 00019ms SCall: 00003 DCall: 00743 [192.168.1.101:4569]
AUTHMETHODS : 1
USERNAME : client1
Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: INVAL
Timestamp: 00019ms SCall: 00743 DCall: 00003 [192.168.1.101:4569]
Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: REGREQ
Timestamp: 00000ms SCall: 00743 DCall: 00000 [192.168.1.101:4569]
USERNAME : client1
REFRESH : 1800
Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass:
REGAUTH
Timestamp: 00006ms SCall: 00004 DCall: 00743 [192.168.1.101:4569]
AUTHMETHODS : 1
USERNAME : client1
Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: INVAL
Timestamp: 00006ms SCall: 00743 DCall: 00004 [192.168.1.101:4569]
Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: REGREQ
Timestamp: 00000ms SCall: 00743 DCall: 00000 [192.168.1.101:4569]
USERNAME : client1
REFRESH : 1800
Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass:
REGAUTH
Timestamp: 00007ms SCall: 00005 DCall: 00743 [192.168.1.101:4569]
AUTHMETHODS : 1
USERNAME : client1
Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: INVAL
Timestamp: 00007ms SCall: 00743 DCall: 00005 [192.168.1.101:4569]
Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: REGREQ
Timestamp: 00000ms SCall: 00743 DCall: 00000 [192.168.1.101:4569]
USERNAME : client1
REFRESH : 1800
Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass:
REGAUTH
Timestamp: 00006ms SCall: 00006 DCall: 00743 [192.168.1.101:4569]
AUTHMETHODS : 1
USERNAME : client1
Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: INVAL
Timestamp: 00006ms SCall: 00743 DCall: 00006 [192.168.1.101:4569]
Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: REGREQ
Timestamp: 00000ms SCall: 00743 DCall: 00000 [192.168.1.101:4569]
USERNAME : client1
REFRESH : 1800
Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass:
REGAUTH
Timestamp: 00007ms SCall: 00007 DCall: 00743 [192.168.1.101:4569]
AUTHMETHODS : 1
USERNAME : client1
Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: INVAL
Timestamp: 00007ms SCall: 00743 DCall: 00007 [192.168.1.101:4569]
Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: REGREQ
Timestamp: 00000ms SCall: 00743 DCall: 00000 [192.168.1.101:4569]
USERNAME : client1
REFRESH : 1800
Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass:
REGAUTH
Timestamp: 00007ms SCall: 00008 DCall: 00743 [192.168.1.101:4569]
AUTHMETHODS : 1
USERNAME : client1
Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: INVAL
Timestamp: 00007ms SCall: 00743 DCall: 00008 [192.168.1.101:4569]
Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: REGREQ
Timestamp: 00000ms SCall: 00743 DCall: 00000 [192.168.1.101:4569]
USERNAME : client1
REFRESH : 1800
Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass:
REGAUTH
Timestamp: 00007ms SCall: 00009 DCall: 00743 [192.168.1.101:4569]
AUTHMETHODS : 1
USERNAME : client1
Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: INVAL
Timestamp: 00007ms SCall: 00743 DCall: 00009 [192.168.1.101:4569]
Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: REGREQ
Timestamp: 00000ms SCall: 00743 DCall: 00000 [192.168.1.101:4569]
USERNAME : client1
REFRESH : 1800
Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass:
REGAUTH
Timestamp: 00007ms SCall: 00010 DCall: 00743 [192.168.1.101:4569]
AUTHMETHODS : 1
USERNAME : client1
Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: INVAL
Timestamp: 00007ms SCall: 00743 DCall: 00010 [192.168.1.101:4569]
Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: REGREQ
Timestamp: 00000ms SCall: 00743 DCall: 00000 [192.168.1.101:4569]
USERNAME : client1
REFRESH : 1800
voip*CLI>
Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass:
REGAUTH
Timestamp: 00007ms SCall: 00011 DCall: 00743 [192.168.1.101:4569]
AUTHMETHODS : 1
USERNAME : client1
Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: INVAL
Timestamp: 00007ms SCall: 00743 DCall: 00011 [192.168.1.101:4569]
Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: REGREQ
Timestamp: 00000ms SCall: 00743 DCall: 00000 [192.168.1.101:4569]
USERNAME : client1
REFRESH : 1800
Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass:
REGAUTH
Timestamp: 00014ms SCall: 00012 DCall: 00743 [192.168.1.101:4569]
AUTHMETHODS : 1
USERNAME : client1
What the above means?
How can I check if the client is registered?
Is my config ok?
Bart,
> Try adding nat=yes to each extention in the sip.conf file.
>
> Example========================
> [3420515]
> username=3420515
> type=friend
> secret=1234
> qualify=no
> port=5060
> pickupgroup=
> nat=yes
> mailbox=
> host=dynamic
> dtmfmode=rfc2833
> disallow=
> context=from-internal
> canreinvite=no
> callgroup=
> callerid="TEST" <3420515>
> allow=
>
>
> Thanks,
> Ty Carter
>
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com
>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
>> Bartosz Wegrzyn - asterisk
>> Sent: Tuesday, February 22, 2005 8:01 AM
>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>> Subject: Re: [Asterisk-Users] Conecting to asterisk server
>> through NAT usingIAX
>>
>> All clients tryingtoconnect tothe asterix says that there is
>> a problem comunicating with the server. It looks like the
>> clients don't see the server. But from the log it looks ok.
>> Maybe may config is wrong.
>> What is the simplest configuration to allow external clinets
>> tocontect to my server. For me it was this entry in iax.conf
>>
>> [client1]
>> type=peer
>> usernamename=client1
>> secret=test
>> context=sip
>> host=dynamic
>> allow=all
>>
>> Is the above ok.
>>
>> Maybe I will try to eliminate the router and I will try it directly.
>>
>> Thanks
>>
>> > well, it seems like the 2 are communicating correctley.. just went
>> > through all the logs what is the error that you recieve?
>> >
>> > ----- Original Message -----
>> > From: "Bartosz Wegrzyn - asterisk" <junk at lexon.ws>
>> > To: "Asterisk Users Mailing List - Non-Commercial Discussion"
>> > <asterisk-users at lists.digium.com>
>> > Sent: Monday, February 21, 2005 12:52 PM
>> > Subject: Re: [Asterisk-Users] Conecting to asterisk server
>> through NAT
>> > usingIAX
>> >
>> >
>> >> This was set on linksys wrt54.
>> >> I turned on the forwarding to asterisk server on
>> > port 4569.
>> >> I believe that by default all outgoing packets pass
>> > through.
>> >>
>> >> Bart,
>> >>
>> >>> Hallo
>> >>> Did you allow udp outgoing on 4569 as well.. i
>> > found
>> >>> udp bit different than
>> >>> tcp when comming to firewalls
>> >>> liaan
>> >>>
>> >>> ----- Original Message -----
>> >>> From: "Bartosz Wegrzyn - asterisk" <junk at lexon.ws>
>> >>> To: <timebandit001 at gmail.com>; "Asterisk Users
>> > Mailing
>> >>> List - Non-Commercial
>> >>> Discussion" <asterisk-users at lists.digium.com>
>> >>> Sent: Monday, February 21, 2005 12:29 PM
>> >>> Subject: Re: [Asterisk-Users] Conecting to asterisk
>> server through
>> >>> NAT usingIAX
>> >>>
>> >>>
>> >>>>I did change the port 4569.
>> >>>> Also my router forwards those packets.
>> >>>>
>> >>>> If I start tcpdump port 4569 on my server I
>> > receive:
>> >>>>
>> >>>> 04:25:36.061292 IP 192.168.1.253.4569 >
>> >>> beu164.neoplus.adsl.tpnet.pl.4569:
>> >>>> UDP, length 24
>> >>>> 04:25:39.154871 IP
>> > beu164.neoplus.adsl.tpnet.pl.4569
>> >>>> 192.168.1.251.4569:
>> >>>> UDP, length 24
>> >>>> 04:25:39.155919 IP 192.168.1.253.4569 >
>> >>> beu164.neoplus.adsl.tpnet.pl.4569:
>> >>>> UDP, length 12
>> >>>> 04:25:44.063009 IP 192.168.1.253.4569 >
>> >>> beu164.neoplus.adsl.tpnet.pl.4569:
>> >>>> UDP, length 12
>> >>>> 04:25:46.063463 IP 192.168.1.253.4569 >
>> >>> beu164.neoplus.adsl.tpnet.pl.4569:
>> >>>> UDP, length 24
>> >>>> 04:25:46.063952 IP 192.168.1.253.4569 >
>> >>> beu164.neoplus.adsl.tpnet.pl.4569:
>> >>>> UDP, length 12
>> >>>> 04:25:49.119019 IP
>> > beu164.neoplus.adsl.tpnet.pl.4569
>> >>>> 192.168.1.251.4569:
>> >>>> UDP, length 24
>> >>>> 04:25:49.120272 IP 192.168.1.253.4569 >
>> >>> beu164.neoplus.adsl.tpnet.pl.4569:
>> >>>> UDP, length 12
>> >>>>
>> >>>> It means that client is trying to comunicate with
>> >>> asterisk server.
>> >>>> But the client says that the server could not be
>> >>> contacted.
>> >>>>
>> >>>> On asterisk console with iax2 debuging enabled I
>> >>> receive
>> >>>>
>> >>>> Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 000
>> > Type:
>> >>> IAX Subclass:
>> >>>> REGREQ
>> >>>> Timestamp: 00007ms SCall: 00001 DCall: 00000
>> >>> [66.234.228.170:4569]
>> >>>> USERNAME : nWv96gaD75
>> >>>> REFRESH : 60
>> >>>>
>> >>>> Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 001
>> > Type:
>> >>> IAX Subclass:
>> >>>> REGAUTH
>> >>>> Timestamp: 00012ms SCall: 00055 DCall: 00001
>> >>> [66.234.228.170:4569]
>> >>>> AUTHMETHODS : 3
>> >>>> CHALLENGE : 164462354
>> >>>> USERNAME : nWv96gaD75
>> >>>>
>> >>>> Tx-Frame Retry[000] -- OSeqno: 001 ISeqno: 001
>> > Type:
>> >>> IAX Subclass:
>> >>>> REGREQ
>> >>>> Timestamp: 00049ms SCall: 00001 DCall: 00055
>> >>> [66.234.228.170:4569]
>> >>>> USERNAME : nWv96gaD75
>> >>>> REFRESH : 60
>> >>>> MD5 RESULT :
>> > 478939afef8fa0ec5b480cc939dedf6f
>> >>>>
>> >>>> Rx-Frame Retry[ No] -- OSeqno: 001 ISeqno: 002
>> > Type:
>> >>> IAX Subclass:
>> >>>> REGACK
>> >>>> Timestamp: 00047ms SCall: 00055 DCall: 00001
>> >>> [66.234.228.170:4569]
>> >>>> USERNAME : nWv96gaD75
>> >>>> DATE TIME : 173363009
>> >>>> REFRESH : 60
>> >>>> APPARENT ADDRES : IPV4 69.208.170.240:4569
>> >>>>
>> >>>> Tx-Frame Retry[-01] -- OSeqno: 002 ISeqno: 002
>> > Type:
>> >>> IAX Subclass: ACK
>> >>>> Timestamp: 00047ms SCall: 00001 DCall: 00055
>> >>> [66.234.228.170:4569]
>> >>>> Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 000
>> > Type:
>> >>> IAX Subclass:
>> >>>> REGREQ
>> >>>> Timestamp: 00003ms SCall: 13354 DCall: 00000
>> >>> [83.28.32.164:4569]
>> >>>> USERNAME : tester
>> >>>> REFRESH : 300
>> >>>>
>> >>>> Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001
>> > Type:
>> >>> IAX Subclass:
>> >>>> REGAUTH
>> >>>> Timestamp: 00019ms SCall: 00002 DCall: 13354
>> >>> [83.28.32.164:4569]
>> >>>> AUTHMETHODS : 1
>> >>>> USERNAME : tester
>> >>>>
>> >>>> Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000
>> > Type:
>> >>> IAX Subclass:
>> >>>> REGREQ
>> >>>> Timestamp: 00003ms SCall: 13354 DCall: 00000
>> >>> [83.28.32.164:4569]
>> >>>> USERNAME : tester
>> >>>> REFRESH : 300
>> >>>>
>> >>>> Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001
>> > Type:
>> >>> IAX Subclass: ACK
>> >>>> Timestamp: 00003ms SCall: 00002 DCall: 13354
>> >>> [83.28.32.164:4569]
>> >>>> Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000
>> > Type:
>> >>> IAX Subclass:
>> >>>> REGREQ
>> >>>> Timestamp: 00003ms SCall: 13354 DCall: 00000
>> >>> [83.28.32.164:4569]
>> >>>> USERNAME : tester
>> >>>> REFRESH : 300
>> >>>>
>> >>>> Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001
>> > Type:
>> >>> IAX Subclass: ACK
>> >>>> Timestamp: 00003ms SCall: 00002 DCall: 13354
>> >>> [83.28.32.164:4569]
>> >>>> Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000
>> > Type:
>> >>> IAX Subclass:
>> >>>> REGREQ
>> >>>> Timestamp: 00003ms SCall: 13354 DCall: 00000
>> >>> [83.28.32.164:4569]
>> >>>> USERNAME : tester
>> >>>> REFRESH : 300
>> >>>>
>> >>>> Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001
>> > Type:
>> >>> IAX Subclass: ACK
>> >>>> Timestamp: 00003ms SCall: 00002 DCall: 13354
>> >>> [83.28.32.164:4569]
>> >>>> Tx-Frame Retry[001] -- OSeqno: 000 ISeqno: 001
>> > Type:
>> >>> IAX Subclass:
>> >>>> REGAUTH
>> >>>> Timestamp: 00019ms SCall: 00002 DCall: 13354
>> >>> [83.28.32.164:4569]
>> >>>> AUTHMETHODS : 1
>> >>>> USERNAME : tester
>> >>>>
>> >>>> Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000
>> > Type:
>> >>> IAX Subclass:
>> >>>> REGREQ
>> >>>> Timestamp: 00003ms SCall: 13354 DCall: 00000
>> >>> [83.28.32.164:4569]
>> >>>> USERNAME : tester
>> >>>> REFRESH : 300
>> >>>>
>> >>>> Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001
>> > Type:
>> >>> IAX Subclass: ACK
>> >>>> Timestamp: 00003ms SCall: 00002 DCall: 13354
>> >>> [83.28.32.164:4569]
>> >>>> Tx-Frame Retry[000] -- OSeqno: 001 ISeqno: 001
>> > Type:
>> >>> IAX Subclass:
>> >>>> LAGRQ
>> >>>> Timestamp: 10022ms SCall: 00002 DCall: 13354
>> >>> [83.28.32.164:4569]
>> >>>> Tx-Frame Retry[002] -- OSeqno: 000 ISeqno: 001
>> > Type:
>> >>> IAX Subclass:
>> >>>> REGAUTH
>> >>>> Timestamp: 00019ms SCall: 00002 DCall: 13354
>> >>> [83.28.32.164:4569]
>> >>>> AUTHMETHODS : 1
>> >>>> USERNAME : tester
>> >>>>
>> >>>> Tx-Frame Retry[001] -- OSeqno: 001 ISeqno: 001
>> > Type:
>> >>> IAX Subclass:
>> >>>> LAGRQ
>> >>>> Timestamp: 10022ms SCall: 00002 DCall: 13354
>> >>> [83.28.32.164:4569]
>> >>>> Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000
>> > Type:
>> >>> IAX Subclass:
>> >>>> REGREQ
>> >>>> Timestamp: 00003ms SCall: 13354 DCall: 00000
>> >>> [83.28.32.164:4569]
>> >>>> USERNAME : tester
>> >>>> REFRESH : 300
>> >>>>
>> >>>> Tx-Frame Retry[-01] -- OSeqno: 000 ISeqno: 001
>> > Type:
>> >>> IAX Subclass: ACK
>> >>>> Timestamp: 00003ms SCall: 00002 DCall: 13354
>> >>> [83.28.32.164:4569]
>> >>>> Tx-Frame Retry[000] -- OSeqno: 002 ISeqno: 001
>> > Type:
>> >>> IAX Subclass:
>> >>>> PING
>> >>>> Times
>> >>>>
>> >>>>
>> >>>> Any ideas what could be wrong.
>> >>>>
>> >>>> Thanks
>> >>>>
>> >>>>
>> >>>>>> I use linksys router.
>> >>>>>> Now, I am trying to connect from outside to my
>> >>> asterisk server.
>> >>>>>> I use Diax as iax client.
>> >>>>>> For some reason I cannot connect to my server
>> > from
>> >>> outside.
>> >>>>>> On my router I forward those ports to my
>> > asterisk
>> >>> server.
>> >>>>>> 5060-5063
>> >>>>>> 10000-20000
>> >>>>>> 5036
>> >>>>>> 4569
>> >>>>> For IAX, only port you have to forward is 4569
>> > UDP
>> >>>>>
>> >>>>> Notice the UDP, not TCP
>> >>>>>
>> >>>>> I'm using Linksys WRT54G and it works without a
>> >>> hitch.
>> >>>>>
>> >>>>>> It works ok with broadvoice, but clinets cannot
>> >>> connect to the server.
>> >>>>>> This is my iax.conf file
>> >>>>>> [general]
>> >>>>>> port=5036
>> >>>>>
>> >>>>> well, here's your problem, port=5036. This is not
>> >>> the standard IAX
>> >>>>> port. comment that line or replace it with
>> >>> port=4569
>> >>>>>
>> >>>>> hth
>> >>>>> _______________________________________________
>> >>>>> Asterisk-Users mailing list
>> >>>>> Asterisk-Users at lists.digium.com
>> >>>>>
>> >>>
>> > http://lists.digium.com/mailman/listinfo/asterisk-users
>> >>>>> To UNSUBSCRIBE or update options visit:
>> >>>>>
>> >>>
>> > http://lists.digium.com/mailman/listinfo/asterisk-users
>> >>>>>
>> >>>>
>> >>>> _______________________________________________
>> >>>> Asterisk-Users mailing list
>> >>>> Asterisk-Users at lists.digium.com
>> >>>>
>> >>>
>> > http://lists.digium.com/mailman/listinfo/asterisk-users
>> >>>> To UNSUBSCRIBE or update options visit:
>> >>>>
>> >>>
>> > http://lists.digium.com/mailman/listinfo/asterisk-users
>> >>>>
>> >>>
>> >>>
>> >>>
>> >>>
>> >>> __________________________________
>> >>> Do you Yahoo!?
>> >>> The all-new My Yahoo! - Get yours free!
>> >>> http://my.yahoo.com
>> >>>
>> >>>
>> >>> _______________________________________________
>> >>> Asterisk-Users mailing list
>> >>> Asterisk-Users at lists.digium.com
>> >>>
>> > http://lists.digium.com/mailman/listinfo/asterisk-users
>> >>> To UNSUBSCRIBE or update options visit:
>> >>>
>> > http://lists.digium.com/mailman/listinfo/asterisk-users
>> >>>
>> >>
>> >> _______________________________________________
>> >> Asterisk-Users mailing list
>> >> Asterisk-Users at lists.digium.com
>> >>
>> > http://lists.digium.com/mailman/listinfo/asterisk-users
>> >> To UNSUBSCRIBE or update options visit:
>> >>
>> > http://lists.digium.com/mailman/listinfo/asterisk-users
>> >>
>> >
>> >
>> >
>> >
>> > __________________________________
>> > Do you Yahoo!?
>> > All your favorites on one personal page - Try My Yahoo!
>> > http://my.yahoo.com
>> > _______________________________________________
>> > Asterisk-Users mailing list
>> > Asterisk-Users at lists.digium.com
>> > http://lists.digium.com/mailman/listinfo/asterisk-users
>> > To UNSUBSCRIBE or update options visit:
>> > http://lists.digium.com/mailman/listinfo/asterisk-users
>> >
>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
>
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
More information about the asterisk-users
mailing list