[Asterisk-Users] Re: Problem selecting E1 on TE405P

[BSDR]

thanks for replying, here it the zaptel.conf:

span=1,1,0,ccs,hdb3
span=2,0,0,ccs,hdb3
span=3,0,0,ccs,hdb3
span=4,0,0,ccs,hdb3
bchan=1-15,17-31
dchan=16
bchan=32-46,48-62
dchan=47
bchan=63-77,79-93
dchan=78
bchan=94-108,110-124
dchan=109
loadzone	= nl 
defaultzone	= nl

>hi,
>could you please provide your zaptel.conf, it's probably a configuration 
>problem.
>
>BSDR a ?crit :
>
>>I am trying to install a TE405P which is to be connected to E1 trunks. 
>>I have set the jumpers to E1 (closed), but modprobe wct4xxp still fails 
>>with the message: ZT_CHANCONFIG failed for channel 97 - which obviously
>>means the card is still in T1 mode. I have tried everything I can think
>>of, any ideas?
>>
>>TIA