[Asterisk-Users] Interface * with ATA from ATA FXS port?

[Rich Adamson]

> Me again... I have service with a company that does not allow for a BYOD
> plan. They will not give out credential or server info either. Is it
> possible to run the FXS port of the ATA to an FXO port in *? 
> 
> The service I have is throug Broadvox Direct using the Mediatrix 2102. I
> have tried this using loop start and kewl start. The * box sees the
> incoming ring, picks up and starts my dial plan. But the Mediatrix never
> recognizes that the * box has picked up and continues to ring and then
> goes on to voicemail.
> 
> I am beginning to think that this is not possible. Guess maybe I should
> have found another provider. I have a number port in progress right now
> and cannot stop it.

Sounds like an ata or * config problem to me, but then without any 
copy/paste of what you've configured, debug data, etc, no one is going 
to get any closer then throwing a dart at the wall. Is that ata a Cisco 
or what?

So, if you really want some help, try to collect and post some useful
data in some reasonable manner.

- config data from * for your ata box
- config data from * for your extensions.conf
- any debug that supports your boxes (eg, sip debug, zap debug, etc)
- config data and/or debug data from the ata