[Asterisk-Users] Asterisk in front of Toshiba CTX

[Daniel Burget]

I have googled, and wiki'ed until blue. Is it possible to put
T1---*----Toshiba CTX ? I have a TE405P, with one interface programmed
for the T1, I am not sure how to program the 2nd port to mimick the T1
to the Toshiba. The Zapata.conf 

 

[channels]

switchtype=national

context=from-pstn

signalling=pri_cpe

usecallerid=asreceived

echocancel=yes

echocancelwhenbridged=no

echotraining=400

overlapdial=yes

immediate=no

group=0

channel => 1-23

 

Zaptel.conf

 

bchan=1-23

dchan=24

span=1,0,0,esf,b8zs

 

This works for the T1 into *, or Into Toshiba. I want the calls to go
into *, if they don't match exten.conf to go to the Toshiba. If the
Toshiba dials out, It goes into * and out via sip. So, the T1 will be
for internal DID only.

 

Is this possible, or am I chasing a dream?

 

Thanks much!

 

Dan

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050225/2498eb1c/attachment.htm