WG: AW: [Asterisk-Users] Transfer a call ? Am I looking for theflashcommand ?

[Mateo Meier]

Hey..

Your saying I can not use flash with ISDN ? What options to I have to
transfer a call  directly ? ( So I have a free line afterwords)


>> What interface are you using? ZapBRI? if so you might be able to do the
>> hairpinning if it is supported.
Im not using any interface..

But if you know how to do that, let me know and I install that interface.
Thx for your answer :)


Grüsse / Best Regards
Mateo Meier
 
-------------------------------------------------------------------------
Don't marry for money; you can borrow it cheaper ;-)

 

-----Ursprüngliche Nachricht-----
Von: Steven Critchfield [mailto:critch at basesys.com] 
Gesendet: Freitag, 25. Februar 2005 02:38
An: Asterisk Users Mailing List - Non-Commercial Discussion; ich at mateo.ch
Betreff: Re: AW: [Asterisk-Users] Transfer a call ? Am I looking for
theflashcommand ?

On Fri, 2005-02-25 at 02:21 +0100, Mateo Meier wrote:
> Hey Steven,
> 
> It's actully ISDN.. not a  analog line :)
> Will that change anything :) ?

Yes as I do not believe flash is something you can do on ISDN at all. 

What interface are you using? ZapBRI? if so you might be able to do the
hairpinning if it is supported.

> >> Been covered before, You can't do that on an analog line. Problem comes
> >> from where you are and what flash would be working on at that point. If
> >> you flash asterisk and get dialtone again, you are getting the dialtone
> >>  from asterisk. At this point the only channel being worked is the one
> >> you are on and flashing it won't help.
> 
> >>  What you would need to do is get the other leg of the call to make the
> >> flash. 
> 
> >> Of course if you where on a PRI link, you could do "hairpinning", "ect"
> >> or "tromboning" and get the call taken back by the PSTN and transferred
> >> to the new number.
> >> -- 
> >> Steven Critchfield <critch at basesys.com>

-- 
Steven Critchfield <critch at basesys.com>