[Asterisk-Users] CallTransfer

[James Bean]

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
> Mark Benson
> Sent: Thursday, 24 February 2005 8:41 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] CallTransfer
> 
> I get the impression that the transfer/flash/recall etc etc 
> buttons don't always work - it seems to depend on what 
> phone/firmware you are using. And possibly the version of asterisk.
> 
> I am using BT102s and some generic voip phone. On the BT102 
> the transfer button will put the call on hold and give you a 
> new line to call an extention with, however nothing happens 
> when I call an extention. On the generic voip phone the 
> transfer button does nothing.
> 
> I have resorted to using # for blind xfer and *2 for attended xfer.
> 

On the BT102's this got me initially to until I had a play.

When transfering a call with the BT series phone after you hit the
transfer button and it puts the call on hold and you dial the extension
you wish to transfer to you must hit the Send button for it to send the
call across. Its an attended transfer, if the other person says take a
message you can get the call back and take a message.

James