: [Asterisk-Users] QSIG, Asterisk and Eicon DIVA

[Joao Pereira]

Are you using a Diva SERVER board or just a Diva PCI?
I also whant to connect Asterisk with a Siemens HH3000, but I whant to know
if it can be done with an Eicon PCI or with a Digium board, because the
Eicon DIVA Server 4BRI is very expensive.

Joao Pereira

----- Original Message -----
From: "Peter Svensson" <psvasterisk at psv.nu>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Sent: Thursday, February 24, 2005 9:42 AM
Subject: Re: SV: SV: [Asterisk-Users] QSIG, Asterisk and Eicon DIVA


> On Thu, 24 Feb 2005, Jan Berggren wrote:
>
> > I have read most of Eicons information on Q.SIG, and I am able to load
> > the Q.SIG protocol (instead of ETSI for example). No strange logging in
> > divacrtl mlog.
> >
> > But how do I tell Asterisk to understand Q.SIG?
>
> Is Asterisk involved on a low enough level to even care about the tansport
> mode when using the capi channel? I though Asterisk only requested a call
> to be placed or received etc.
>
> > My PBX is configured for QSIG, but I cannot see anything on my trace
> > when trying to make a call via the S0(Q.SIG)
>
> Are there any debugging / tracing options in capi?
>
> Peter
>
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>