[Asterisk-Users] * or X100P dropping analog calls

[Anton Krall]

I also have x100p cards but ... Shouldn't signalling in the zapata.conf file
be 
signalling=fks_ks  instead of signalling=fxo_ks?

I keep forgetting if you have to set fxo on zapata or zaptel...

One thing that I see when I do a reload on my asterisc box is this always:
Feb 23 02:36:47 WARNING[10343]: chan_zap.c:10015 setup_zap: Ignoring
signalling
    -- Reconfigured channel 1, FXS Kewlstart signalling
    -- Reconfigured channel 2, FXS Kewlstart signalling



-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Eric Wieling
Sent: Martes, 22 de Febrero de 2005 10:49 p.m.
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] * or X100P dropping analog calls

Andrew Duey wrote:

> I have a * box running * version 1.0.3 with two X100P line cards in it and
Cisco 7960 IP phones.  Everything seems to work pretty well with the
exeption that the system hangs up on phone calls for no apparent reason.  It
does this on both incoming and outgoing calls through the POTS line
(currently only have one).  The only thing in the asterisk console with
maximum verbousity is " -- Hungup 'Zap/1-1'" and then the phones act like
the other side hung up.  The only thing that might be related is that I here
beeping or chirping shortly before this happens (it happens randomly
thorught calls every couple of minutes but seems to be more prevelent
shortly before a disconnect).
> 
> Things we've tried to correct the problem:
> -Remove all analog phones from analog line except the X100P -Got rid 
> of off-brand cards and replaced with authentic X100p's -Setup 80mm 
> case fan to blow over cards (the behavior seemed to be overheating
related).
> 
> Right now the signaling is set to: "signalling=fxo_ks" in the zapatel.conf
file.
> 
> Please let me know if anyone else has seen similar behavior (or if you
need more information let me know what).

Yes.  It's frequently caused by busydetect=yes or callprogress=yes in
/etc/asterisk/zapata.conf

--Eric
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users