[ nocadm ] Re: [Asterisk-Users] HDLC Bad FCS / HDLC Abort

[Alex G Robertson]

> 
> Did you confirm you are not running graphics?  (X, frame buffer, etc). 
>  Did you confirm you have unmasked IDE interrupts (-u1 to haparm)?

Yes and Yes. ;-)


# hdparm -i /dev/hd[ac]

/dev/hda:

  Model=SAMSUNG SP1203N, FwRev=TL100-24, SerialNo=0836J1FX419316
  Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
  RawCHS=16383/16/63, TrkSize=34902, SectSize=554, ECCbytes=4
  BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
  CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=234493056
  IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
  PIO modes:  pio0 pio1 pio2 pio3 pio4
  DMA modes:  mdma0 mdma1 mdma2
  UDMA modes: udma0 udma1 udma2 *udma3 udma4 udma5
  AdvancedPM=no WriteCache=enabled
  Drive conforms to: (null):

  * signifies the current active mode


/dev/hdc:

  Model=SAMSUNG SP1203N, FwRev=TL100-24, SerialNo=0836J1FX419368
  Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
  RawCHS=16383/16/63, TrkSize=34902, SectSize=554, ECCbytes=4
  BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
  CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=234493056
  IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
  PIO modes:  pio0 pio1 pio2 pio3 pio4
  DMA modes:  mdma0 mdma1 mdma2
  UDMA modes: udma0 udma1 udma2 *udma3 udma4 udma5
  AdvancedPM=no WriteCache=enabled
  Drive conforms to: (null):

  * signifies the current active mode


-- 
Alex G Robertson
NOC - Microlink