[Asterisk-Users] Anyone using SuperMicro SuperServer 6014P-8R?

[Augustine Olaifa]

 Yes, one of the supermicro motherboards will work fine with both TE10P
and TE05P (not sure of the specifics 6014P-8R) just make  sure you
look out for the slots parameters as follows:

 for TE10P .... the board must have a 32-bit PCI -slot with 66Mhz speed
bus and importantly uses 3volts.

(if the board has a 64-bit PCI-X slot the  better because this will allow
you  switch from 33Mhz -100Mhz speed bus)

(Note that the TE10P will not work with 5 volts board power rating)

for TE05P
  according to the specs on the technical sheet  the card will work with a
16-bit or 32 -bit PCI slot will work fine on the conventional 5Volts power
ratings on boards.


On Mon, 21 Feb 2005, Tony Mountifield wrote:

> Hi,
>
> Is anyone here using the SuperMicro SuperServer 6014P-8R with Asterisk?
> I'm especially interested if you've used it with a TE405P or TE410P.
>
> Cheers
> Tony
>

-- 
Olaifa Augustine
General Data Engineering Services Ltd
18b oshin road,kongi bodija
p.o.box 29460, secretariate,
ibadan.
tel:- 234-2-8105156