[Asterisk-Users] Minimal hardware requirements

[Rudolf Ladyzhenskii]

Thanks.

I guess, I will have to try it and see. Mine is one of those small form factor COMPAQ boxes. I will try to get full specs from COMPAQ/HP. 

What about load Asterisk puts on processor if you do, for example, IP-IP call and IP-PSTN call? Since I will use Polycom phones, I will use SIP.

Rudolf

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of John Novack
( Mozilla - portable )
Sent: Tuesday, February 22, 2005 11:41 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Minimal hardware requirements


Rudolf Ladyzhenskii wrote:

>Hi, all
>
>I am doing "prrof of concept" system. I will have two IP phones connected to Asterisk box. Box itself will have 1 PSTN conenction and one analog phone conenction. A basic minimal configuration.
>
>At the moment I am planning to use an old PII-350 with 128M of RAM I have lying around. I can not test anything yet, as I am waiting for phones to arrive, so question is will that be enough to demonstrate?
>
>Thanks,
>Rudolf
>
>  
>
Depends.

If you plan on using the TDM400 with one each FXS and FXO, the MB needs 
to have PCI Ver 2.2 slots, or the card won't be seen

Any MB made after 2000 probably is OK


John Novack



_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users