[Asterisk-Users] W&M Wink timings for Nortel

[Richard Lyman]

Eric Wieling wrote:
> Rich Adamson wrote:
> 
>>> Does anyone know the default E&M Wink timings for Nortel DID ports?
>>>
>>> The default settings on Asterisk are:
>>>
>>> ;    prewink:     Pre-wink time (default 50ms)
>>> ;    preflash:    Pre-flash time (default 50ms)
>>> ;    wink:        Wink time (default 150ms)
>>> ;    flash:       Flash time (default 750ms)
>>> ;    start:       Start time (default 1500ms)
>>> ;    rxwink:      Receiver wink time (default 300ms)
>>> ;    rxflash:     Receiver flashtime (default 1250ms)
>>> ;    debounce:    Debounce timing (default 600ms)
>>
>>
>>
>> I'm confused. Digium cards do not support E&M trunks, which are older
>> interfaces that include either a two-wire or four-wire audio "plus"
>> two additional wires called the "E" and the "M" leads. So, Wink
>> timing is irrelevant (unless I'm misunderstanding your question).
> 
> 
> The Digium Tx00P and TE*xxxP support E&M Wink.
> _______________________________________________
i've not tested the TE4xxP yet, but the T400P does E&M Immediate 
start also.