[Asterisk-Users] W&M Wink timings for Nortel

[Eric Wieling]

Rich Adamson wrote:

>>Does anyone know the default E&M Wink timings for Nortel DID ports?
>>
>>The default settings on Asterisk are:
>>
>>;    prewink:     Pre-wink time (default 50ms)
>>;    preflash:    Pre-flash time (default 50ms)
>>;    wink:        Wink time (default 150ms)
>>;    flash:       Flash time (default 750ms)
>>;    start:       Start time (default 1500ms)
>>;    rxwink:      Receiver wink time (default 300ms)
>>;    rxflash:     Receiver flashtime (default 1250ms)
>>;    debounce:    Debounce timing (default 600ms)
> 
> 
> I'm confused. Digium cards do not support E&M trunks, which are older
> interfaces that include either a two-wire or four-wire audio "plus"
> two additional wires called the "E" and the "M" leads. So, Wink
> timing is irrelevant (unless I'm misunderstanding your question).

The Digium Tx00P and TE*xxxP support E&M Wink.