[Asterisk-Users] Sangoma A104 - D-Channel problem

[Kumak]

On Fri, Feb 18, 2005 at 03:38:28AM +0100, Michael Bielicki wrote:
> upgrade to the following wanpipe and also upgrade the firmware o the
> crd (it's included in the wanpipe softwaare)
> ftp://ftp.sangoma.com/linux/custom/2.3.2/wanpipe-beta5g-2.3.2.tgz

I did it before asking on the list. I have firmware ver8 on card and wanpipe-beta5g-2.3.2 but problem still exists.

Here is wanpipe1.conf from wancfg

[devices]
wanpipe1 = WAN_AFT_TE1, Comment

[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment

[wanpipe1]
CARD_TYPE       = AFT
S514CPU         = A
CommPort        = PRI
AUTO_PCISLOT    = NO
PCISLOT         = 10
PCIBUS          = 0
FE_MEDIA        = E1
FE_LCODE        = HDB3
FE_FRAME        = CRC4
FE_LINE         = 1
TE_CLOCK        = NORMAL
ACTIVE_CH       = ALL
TE_HIGHIMPEDANCE        = NO
INTERFACE       = V35
CLOCKING        = EXTERNAL
BaudRate        = 0
MTU             = 1500
UDPPORT         = 9000
TTL             = 255
IGNORE_FRONT_END = NO

[w1g1]
PROTOCOL        = HDLC
HDLC_STREAMING  = YES
ACTIVE_CH       = ALL
IDLE_FLAG       = 0x7E
MTU             = 1500
MRU             = 1500
TDMV_SPAN       = 1
TDMV_ECHO_OFF   = NO
MULTICAST       = NO
TRUE_ENCODING_TYPE      = NO