[Asterisk-Users] Outbound Caller ID on PRI

[Rod Bacon]

As it turns out, it was a telco configuration problem all along. I wasted a 
day for nothing...


----- Original Message ----- 
From: "George Cohn" <gwcohn at simplybits.net>
To: "Asterisk Users Mailing List - Non-Commercial Discussion" 
<asterisk-users at lists.digium.com>
Sent: Friday, February 18, 2005 2:38 PM
Subject: Re: [Asterisk-Users] Outbound Caller ID on PRI


> Rod Bacon wrote:
>> Would someone mind doing an intense debug on their ISDN PRI and see what 
>> LEN (length) the calling number field is being sent? Maybe everyone is 
>> sending 14 characters, and my Telco is just fussier than most.
>
> Not asterisk related but on the Nortel Opt 81C switches that I maintain, 
> the CLID is sent out on the PRI-ISDN span d-channels as (520) 873-XXXX 
> which I believe is 14 characters.  It shows up on my caller ID unit at 
> home as (520) 873-XXXX which is 14 characters.
>
> The telco I am connected to is Time Warner and their CO switch is a Nortel 
> DMS-500 running NI2 compatible software.  This is in Arizona USA.
>
> George Cohn
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>