[Asterisk-Users] Trying to install X100p

[Rich Adamson]

Show channels is only going to show you what channels are actually in use,
not what is configured. Try 'zap show channels'. If that indicates zap/1
exists, then your issues are likely in the extensions.conf area.

Post the results of:
 zap show channels
 relavent part of zapata.conf
 relavent part of extensions.conf for both incoming and outgoing calls


------------------------
> desk*CLI> show channels
>         Channel  (Context    Extension    Pri )   State Appl.         Data
> 0 active channel(s)
> desk*CLI>
> 
> >Zaptel Configuration
> >======================
> >
> >
> >Channel map:
> >
> >Channel 01: FXS Kewlstart (Default) (Slaves: 01)
> >
> >1 channels configured.
> >
> >
> >> Try "ztcfg -vvv" when you're doing the above. Might add some clues.
> >> 
> >> After the modprobe, might do a 'lsmod' to see what was loaded.
> >> 
> 
> -- 
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.300 / Virus Database: 265.8.8 - Release Date: 14/02/2005
>  
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

---------------End of Original Message-----------------