[Asterisk-Users] Trying to install X100P

[Mike Wright]

I have just got my X100p card and am trying to install it.

I have built and installed the zaptel drivers without any apparent errors
and I am now trying to get them working. I have the following in config
files

In /etc/zaptel.conf
  fxsks=1

In /etc/asterisk/zapata.conf
  signalling=fxs_ks
  context=default
  channel => 1

Now when I try ti modprobe the drivers this is what happens:

Command:
  modprobe zaptel
/var/log/messages: 
 Feb 17 20:47:43 desk kernel: zaptel: no version for "struct_module" found:
kernel tainted. 
 Feb 17 20:47:43 desk kernel: Zapata Telephony Interface Registered on major
196

Command:
  modprobe wcfxo
/var/log/messages:
  Feb 17 20:48:18 desk kernel: PCI: Found IRQ 9 for device 0000:01:0b.0
  Feb 17 20:48:18 desk kernel: PCI: Sharing IRQ 9 with 0000:00:1f.2
  Feb 17 20:48:18 desk kernel: wcfxo: DAA mode is 'FCC'
  Feb 17 20:48:18 desk kernel: Found a Wildcard FXO: Generic Clone
  Feb 17 20:48:18 desk kernel: Registered tone zone 4 (United Kingdom)

Command:
  ztcfg
/var/log/messages:
  [nothing!]

Now - there does not appear to be a Zap/1 device available in
extensions.conf as I would expect. Nor does anything happen when I ring the
line connected to the X100p. What have I missed?

Cheers




-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.8.8 - Release Date: 14/02/2005