[Asterisk-Users] Re: Cisco 7970 Won't boot after factory reset

[Keith O'Brien]

It is trying to download its firmware.  You need to setup a TFTP Server.  
 
Also be aware that the 7970 only supports SCCP not SIP.   Further, the *
implementation of SCCP doesn't support the latest version of SCCP which is
required for the 7970.  I don't see how it would work at all with *.
 
 
 
 
>>Hi Everyone - 
 
>>I just got my hands on a Cisco 7970 and was told that I should do a
>>factory reset before trying to configure it to work with Asterisk.
 
>>After the factory reset, it will not boot at all, instead sits with the
>>line button lights flashing one at a time in sequence.
 
>>I have had no luck trying to figure it out - anyone run into the same
>>problem that can lend a hand..?

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050216/8d2abdfb/attachment.htm