[Asterisk-Users] Can't connect Snom 190 to Asterix PBX.
Suggestions?
Jason A. Crome
crome at devnetinc.com
Wed Feb 16 15:00:33 MST 2005
Are there any settings that I need to change on the phone to match this?
Thank you!
--------------------------------------------------
Jason A. Crome
Senior Software Engineer, DEVNET, Inc.
E-Mail: crome at devnetinc.com
http://www.devnetinc.com
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
> Hecken, Guido
> Sent: Wednesday, February 16, 2005 11:02 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: RE: [Asterisk-Users] Can't connect Snom 190 to
> Asterix PBX. Suggestions?
>
> Here is a part of a working sip.conf for Asterisk with SNOM190 Phones.
> Try using host=dynamic and have a closer look at the
> configuration in the snom 190.
> Also, try using dtmfmode=rfc2833 .
>
> [general]
> realm = hallinux2.gwsnettech.local
> port = 5060
> bindaddr = 0.0.0.0
> context = default
> disallow=all
> allow=alaw
> allow=ulaw
> allow=gsm
> register => 081503:xxxxxx at sipgate.de/081503 language=de
> tos=0x04
>
> [6301]
> type=friend
> username=6301
> secret=xxxxxx
> host=dynamic
> disallow=all
> allow=alaw
> allow=ulaw
> allow=gsm
> dtmfmode=rfc2833
> mailbox=6301
> context=teilnehmer
> callgroup=1
> pickupgroup=1
> group=2
> callerid => "Guido Hecken [gwsNetTech]" <6301>
>
> Hope, this helps...
>
> Guido Hecken
>
> > -----Ursprüngliche Nachricht-----
> > Von: Jason A. Crome [mailto:crome at devnetinc.com]
> > Gesendet: Mittwoch, 16. Februar 2005 17:05
> > An: asterisk-users at lists.digium.com
> > Betreff: [Asterisk-Users] Can't connect Snom 190 to Asterix PBX.
> Suggestions?
> >
> > Hello,
> >
> > I'm attempting to get Asterisk running for the first time
> in my company.
> As
> > I've never used it before, I am creating a small testbed
> with which to
> learn
> > Asterisk and get the kinks worked out before attempting to
> roll it out.
> >
> > I have * compiled and running, and built the sample config files as
> > suggested by the Wiki. I got my Snom 190 configured to use
> DHCP, and
> > have created an entry in my sip.conf for the phone.
> However, when *
> > boots, I
> get
> > the following message:
> >
> > -- Got SIP response 404 "Not Found" back from 192.168.2.60
> >
> > When I look at the SIP trace logs in the phone, I see the following:
> >
> > Received from udp:192.168.2.15:5060 at 16/2/2005
> 09:38:54:330 (463 bytes):
> >
> > NOTIFY sip:snom at 192.168.2.60 SIP/2.0
> > Via: SIP/2.0/UDP 192.168.2.15:5060;branch=z9hG4bK5e3acadf
> > From: "asterisk" <sip:asterisk at 192.168.2.15>;tag=as65dd26cd
> > To: <sip:snom at 192.168.2.60>
> > Contact: <sip:asterisk at 192.168.2.15>
> > Call-ID: 688c4c6952ecb71e32ea3d1a30519013 at 192.168.2.15
> > CSeq: 102 NOTIFY
> > User-Agent: Asterisk PBX
> > Event: message-summary
> > Content-Type: application/simple-message-summary
> > Content-Length: 42
> >
> > Messages-Waiting: no
> > Voice-Message: 0/0
> >
> > Sent to udp:192.168.2.15:5060 at 16/2/2005 09:38:54:330 (267 bytes):
> >
> > SIP/2.0 404 Not Found
> > Via: SIP/2.0/UDP 192.168.2.15:5060;branch=z9hG4bK5e3acadf
> > From: "asterisk" <sip:asterisk at 192.168.2.15>;tag=as65dd26cd
> > To: <sip:snom at 192.168.2.60>
> > Call-ID: 688c4c6952ecb71e32ea3d1a30519013 at 192.168.2.15
> > CSeq: 102 NOTIFY
> > Content-Length: 0
> >
> > The phone is a Snom 190, running firmware snom190-3.56q-SIP-j.bin
> > (from
> what
> > I can tell).
> >
> > The only Asterisk configuration I have done was in
> sip.conf. I added
> > the following entry for the phone:
> >
> > [test1]
> > type=friend ; Friends place calls and
> receive calls
> > context=from-sip ; Context for incoming calls
> from this user
> > secret=blah
> > language=en ; Use German prompts for this user
> > host=dynamic ; This peer register with us
> > dtmfmode=inband ; Choices are inband,
> rfc2833, or info
> > defaultip=192.168.2.60 ; IP used until peer registers
> > username=snom ; Username to use in INVITE
> until peer
> > registers
> > mailbox=1234,2345 ; Mailboxes for message
> waiting indicator
> > restrictcid=yes ; To have the callerid
> restriced -> sent as
> > ANI
> > disallow=all
> > allow=ulaw ; dtmfmode=inband only works
> with ulaw or
> > alaw!
> > mailbox=1234 at context,2345 ; Mailbox(-es) for message waiting
> indicator
> >
> > The IP of the Snom is indeed 192.168.2.60. Asterisk runs
> at 192.168.2.15.
> >
> > I'm using the latest stable version of *, and it's running
> on FreeBSD 5.3.
> > I did not build from the ports tree.
> >
> > What am I missing? When the phone is configured, how do I
> verify that
> it's
> > working? Any help is greatly appreciated!
> >
> > Thanks in advance,
> > Jason
> >
> > --------------------------------------------------
> > Jason A. Crome
> > Senior Software Engineer, DEVNET, Inc.
> > E-Mail: crome at devnetinc.com
> > http://www.devnetinc.com
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
More information about the asterisk-users
mailing list