[Asterisk-Users] 7912G: Takes the same firmware as 7940/60?

[Andrew Kochetkoff]

Hello Michiel,

Monday, February 14, 2005, 4:35:33 AM, Вы писали:

===8<==============Original message text===============
Michiel van Baak> On 20:08, Sun 13 Feb 05, Stefan Gofferje wrote:
>> Michiel van Baak schrieb:
>>  > Thnx.
>> >No luck for me I guess.
>> >chan_sccp it will be.
>> 
>> Not for the 79[05|12]... At least my 7905 does not like chan_sccp too 
>> much and they crashed my * (1.0.5)... unless you bounty the chan_sccp 
>> developers for 79[05|12] support OR ask your local Cisco dealer for a 
>> 79[05|12] SIP-license (which comes on CD). If you are (as your name 
>> suggests) from .nl, I would recommend www.zendus.de. They turned out to 
>> have really good prices...
>> 
Michiel van Baak> Thnx,

Michiel van Baak> My 7905g is working ok with chan_sccp.
Michiel van Baak> But only basic features work.
Michiel van Baak> What does work:
Michiel van Baak> Voicemail led.
Michiel van Baak> Directories for missed/received/placed calls
Michiel van Baak> getting/placing calls
Michiel van Baak> transfering using the # key

Michiel van Baak> That's about it. And from what I read the SIP image can
Michiel van Baak> really use the rest of the phone like speed dial, call
Michiel van Baak> forward etc.

Michiel van Baak> who knows my tax refunds allow me to buy the sip image ;)
Michiel van Baak> (if there's money left after the new laptop and new fileserver case)
Michiel van Baak> The prices @ zendus are WAY better than anything I seen
Michiel van Baak> here in .nl (the phone alone was 250 euro or something here in nl)

===8<===========End of original message text===========

  I use my 7902g with chan_sccp.
  And have two problems:
      1) When  i  place a call from 7902G to any across Asterisk, i need press a hold
      button  twice.  After  i  can  speak  with  the caused subscriber. Otherwise
      in the handset i hear RingOut.
      2) Sometimes it crashed Asterisk with follows:

      Feb 14 17:19:00 WARNING[26961]: Dead SCCP client: SEP000F8F6576E4
      (0x87d0e70/0x87a4dd8)
      Feb 14 17:19:00 ERROR[26961]: Tried to send packet over DOWN device.
      Feb 14 17:19:00 ERROR[26961]: Tried to send packet over DOWN device.
      Feb 14 17:19:00 ERROR[26961]: Tried to send packet over DOWN device.
      Feb 14 17:19:00 ERROR[26961]: Tried to send packet over DOWN device.
      Feb 14 17:19:00 ERROR[26961]: Tried to send packet over DOWN device.
      Feb 14 17:19:00 ERROR[26961]: Tried to send packet over DOWN device.
      Feb 14 17:19:00 ERROR[26961]: Tried to send packet over DOWN device.
      Feb 14 17:19:00 ERROR[26961]: Tried to send packet over DOWN device.
      Feb 14 17:19:00 ERROR[26961]: Tried to send packet over DOWN device.
      Feb 14 17:19:00 ERROR[26961]: Tried to send packet over DOWN device.
      Feb 14 17:19:00 ERROR[26961]: Tried to send packet over DOWN device.
      Feb 14 17:19:00 ERROR[26961]: Tried to send packet over DOWN device.
      Feb 14 17:19:00 ERROR[26961]: Tried to send packet over DOWN device.
      Feb 14 17:19:00 ERROR[26961]: Tried to send packet over DOWN device.
      Feb 14 17:19:00 ERROR[26961]: Tried to send packet over DOWN device.
      Feb 14 17:19:00 ERROR[26961]: Tried to send packet over DOWN device.

  Did you help me correct this problems.
      
-- 
Best regards,
Andrew Kochetkoff.
mailto:andrews at mtelecom.chita.ru