[Asterisk-Users] Asterisk-H323

Vitalie Apostu Vitalie.Apostu at Compuflex.Net
Mon Feb 14 10:38:19 MST 2005


 No, I am using H323 driver

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of David Liu
Sent: Monday, February 14, 2005 11:36 AM
To: vitalie.apostu at compuflex.net; Asterisk Users Mailing List -
Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Asterisk-H323

Hi there,

The settings are in oh323.conf

; Enable fast start (yes,no).
;
fastStart=yes
;
; Enable H.245 tunnelling (yes,no).
;
h245Tunnelling=yes
;
; Enable early H.245 messages in call SETUP message.
;
h245inSetup=yes
;
; Enable in-band-DTMF detection.
; (Note: Netmeeting uses in-band DTMFs)
;

I assume you are using the OH323 driver right?

Also if no audio, it could also be a codec issue. You need to set the codec
for the OH323 call in oh323.conf as well.

David
Hong Kong

On Mon, 14 Feb 2005 11:27:53 -0500, Vitalie Apostu wrote
> Cisco and Asterisk are not behind firewall.
> 
> Where can I check for settings noH245Tuneling and noFastStart in 
> Asterisk H323?
> 
> -----
> -- Executing Dial("SIP/msn-069a", "H323/73952389506 at peer:1720") in 
> new stack    -- Called 73952389506 at peer:1720    -- H323/peer:1720 is 
> making progress passing it to SIP/msn-069a    -- H323/peer:1720 is ringing
>     -- H323/peer:1720 answered SIP/msn-069a
>   == Spawn extension (messanger, 73952389506, 1) exited non-zero on 
> 'SIP/msn-069a'
> --------------
> 
> -----Original Message-----
> From: ht at phonitel.com [mailto:ht at phonitel.com]
> Sent: Monday, February 14, 2005 11:29 AM
> To: Vitalie.Apostu at Compuflex.Net
> Subject: Re: [Asterisk-Users] Asterisk-H323
> 
> Make sure settings for:
> 
> noH245Tuneling and noFastStart parameters are correctly tuned both 
> sides.
> 
> Is Cisco or Asterisk behind NAT?
> 
> Send more info
> 

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users




More information about the asterisk-users mailing list