[Asterisk-Users] PLEASE HELP Adit 600 went kaput?

[Richard Reina]

--- Andrew Kohlsmith <akohlsmith-asterisk at benshaw.com>
wrote:

> On February 12, 2005 07:31 pm, Richard Reina wrote:
> > On thing that is odd is that although the t1 cross
> > over cable is plugged in to both * and the Adit. 
> Both
> > t1 and t1 leds on the Adit are red.  How can they
> both
> > have the same status if one is hooke up and on is
> not?
> >  Could my cross over cable have some loose wiring?
> 
> Unplug it and plug in a loopback plug (pin 1->5, pin
> 2->6) -- if the T1 alarm 
> doesn't go away, the T1 controller itself is kaput. 
> If it goes green (or 
> off), then your wire is suspect.
> 
> You can certainly have both T1 controllers showing
> alarm if you never turned 
> the second one off.  Honestly it sounds as if you
> didn't do *any* basic 
> diagnostics here.  Tell us what you *have* tried,
> and we can suggest other 
> possible tests.
> 

The problem is that I don't know how to do any
diagnostics.  I'm having the telco wiring vendor come
out today hopefully he will have a loop-back and/or
another crossover  cable.


		
__________________________________ 
Do you Yahoo!? 
Meet the all-new My Yahoo! - Try it today! 
http://my.yahoo.com