[Asterisk-Users] Re: Detect hangup

[Liaan vd Merwe]

hi
thanks very much
I need to look into the dsp.c file.. the tone generate is abou 2 seconds on. then 0.5 off.
busy changing the pabx connection so i can plug directley into a co-line. this would enable the pabx and * to use loop start.. and i think that will solve my problems
 
thanks and enjoy weekend
  ----- Original Message ----- 
  From:   Tobias.Cermann at Auerswald.de   
  To: asterisk-users at lists.digium.com   
  Sent: Friday, February 11, 2005 1:44   PM
  Subject: [Asterisk-Users] Re: Detect   hangup
  

  Hi,
   
  indications.conf has nothing to do with hangup detection. Instead it   defines how to signal the line state to the remote party, e.g. what tone   you will here as a busy indication.
  If you want asterisk to recognize hangups and standard busy   detection doesn't work for you, you would have to adjust dsp.c.
  For Zaptel channels you have to configure busydetect=yes and   busycount=3 for instance in zapata.conf.
   
  Tobias
   
  
  
---------------------------------
  

_______________________________________________
Asterisk-Users   mailing   list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To   UNSUBSCRIBE or update options visit:
     http://lists.digium.com/mailman/listinfo/asterisk-users
		
---------------------------------
Do you Yahoo!?
 Read only the mail you want - Yahoo! Mail SpamGuard.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050211/72c58747/attachment.htm