[Asterisk-Users] Cisco 7960 Beating a Dead Horse
Steve Blair
blairs at isc.upenn.edu
Wed Feb 9 14:39:52 MST 2005
I'm not sure of your configuration but last time I looked there
wasn't a SIP v8.3. Unless that has changed I'd suggest getting
the correct version of SIP if that is what you'd like to test.
Max Clark wrote:
> What I don't understand is that the phone will request and download
> the SIP/SEP*.cnf files which are well over 8.3, and if I change the
> file name to an 8.3 format the phone doesn't even attempt to download
> the firmware.
>
> -Max
>
> Max Clark
> max [at] clarksys.com
> http://www.clarksys.com
>
>
> BJ Weschke wrote:
>
>> Hey there -
>> At second look, this definitely looks like an 8/3 problem because if
>> you look at the second file request, it's trying to get the firmware
>> file but you're only seeing the first 8 chars in the filename it's
>> asking for.
>>
>>
>> On Wed, 09 Feb 2005 13:16:36 -0800, Max Clark <max at clarksys.com> wrote:
>>
>>> BJ,
>>>
>>> I tried removing the SEP* files and changing the OS79XX.TXT to the 7.3
>>> version of the firmware and then got the message below in my tftpd
>>> server.
>>>
>>> How do I check the version of the Firmware that the phone is running?
>>> Based on what you said I have a feeling that I need to go way back in
>>> version numbers to get current.
>>>
>>> Thanks,
>>> Max
>>>
>>> Connection received from 10.6.0.224 on port 50608 [09/02 13:14:02.218]
>>> Read request for file <OS79XX.TXT>. Mode octet [09/02 13:14:02.234]
>>> <OS79XX.TXT>: sent 1 blk, 12 bytes in 0 s. 0 blk resent [09/02
>>> 13:14:02.234]
>>> Connection received from 10.6.0.224 on port 50609 [09/02 13:14:02.234]
>>> Read request for file <P0S3-07-.bin>. Mode octet [09/02 13:14:02.234]
>>> File <P0S3-07-.bin> : error 2 in system call CreateFile The system
>>> cannot find the file specified. [09/02 13:14:02.234]
>>> Connection received from 10.6.0.224 on port 50610 [09/02 13:14:02.234]
>>> Read request for file <SEP0007EB0630A6.cnf>. Mode octet [09/02
>>> 13:14:02.250]
>>> File <SEP0007EB0630A6.cnf> : error 2 in system call CreateFile The
>>> system cannot find the file specified. [09/02 13:14:02.250]
>>> Connection received from 10.6.0.224 on port 50611 [09/02 13:14:02.250]
>>> Read request for file <SEPDefault.cnf>. Mode octet [09/02 13:14:02.250]
>>> File <SEPDefault.cnf> : error 2 in system call CreateFile The system
>>> cannot find the file specified. [09/02 13:14:02.250]
>>>
>>> Max Clark
>>> max [at] clarksys.com
>>> http://www.clarksys.com
>>>
>>> BJ Weschke wrote:
>>>
>>>> You're probably going to want to go ahead and remove the SEP<mac
>>>> address>.cnf.xml file from the TFTP server and leave the SIP<mac
>>>> address>.cnf file in place.
>>>>
>>>> I think with version 6 or 7 of the firmware (don't recall which one -
>>>> probably the one that starts using the Universal App Loader) the phone
>>>> starts looking for the SEP<mac address>.cnf.xml file and will default
>>>> to call manager mode if it finds it.
>>>>
>>>> Additionally, once you get into v7.x of the firmware, the OS79XX.TXT
>>>> file goes from P0S3-XX-X-XX to P0O3-XX-X-XX even though you're going
>>>> to use SIP. SIPDefault.cnf then contains the version of the software
>>>> you actually want to use:
>>>>
>>>> # eg..
>>>>
>>>> # SIP Default Generic Configuration File
>>>>
>>>> # Image Version
>>>> image_version: P0S3-07-3-00
>>>>
>>>> This threw me for a loop initially as my phone factory shipped with
>>>> v3.3 of a factory image and while upgrading up through the versions,
>>>> you had to initially indicate in OS79XX.TXT whether or not you were
>>>> going to do SIP or SCCP via the string that was in OS79XX.TXT. With
>>>> the UAL, you no longer do it that way. :-/
>>>>
>>>>
>>>> On Wed, 09 Feb 2005 12:20:01 -0800, Max Clark <max at clarksys.com>
>>>> wrote:
>>>>
>>>>
>>>>> Hi all,
>>>>>
>>>>> So I have been reading through the docs available online and the
>>>>> different threads on this list, but I cannot seem to get this
>>>>> phone to work.
>>>>>
>>>>> I have configured the OS79XX.TXT and SIP/SEP*.cnf files (see
>>>>> attached),
>>>>> when I configure the phone to point to my tftp server and reboot it I
>>>>> get this message:
>>>>>
>>>>> Connection received from 10.6.0.224 on port 50608 [09/02
>>>>> 12:16:11.750]
>>>>> Read request for file <OS79XX.TXT>. Mode octet [09/02 12:16:11.750]
>>>>> <OS79XX.TXT>: sent 1 blk, 12 bytes in 0 s. 0 blk resent [09/02
>>>>> 12:16:11.750]
>>>>> Connection received from 10.6.0.224 on port 50609 [09/02
>>>>> 12:16:11.750]
>>>>> Read request for file <P0S3-06-.bin>. Mode octet [09/02 12:16:11.765]
>>>>> File <P0S3-06-.bin> : error 2 in system call CreateFile The system
>>>>> cannot find the file specified. [09/02 12:16:11.765]
>>>>> Connection received from 10.6.0.224 on port 50610 [09/02
>>>>> 12:16:11.765]
>>>>> Read request for file <SEP0007EB0630A6.cnf>. Mode octet [09/02
>>>>> 12:16:11.765]
>>>>> <SEP0007EB0630A6.cnf>: sent 7 blks, 3469 bytes in 0 s. 0 blk resent
>>>>> [09/02 12:16:11.781]
>>>>>
>>>>> Which lead me to believe that there was an 8.3 naming issue when
>>>>> using a
>>>>> windows based tftpd server. So I changed the file names of my
>>>>> image to
>>>>> an 8.3 structure, updated the configuration files and rebooted.
>>>>> After I
>>>>> do that I see the request and transfer of the OS79XX.TXT and the
>>>>> SEP0007EB0630A6.cnf but nothing for the firmware, or anything
>>>>> about the
>>>>> SIP configuration files.
>>>>>
>>>>> Just out of curiostity looking at my phone config at this point
>>>>> the call
>>>>> manager is pointing to the tftp server.
>>>>>
>>>>> What gives? How do I get this phone to download the SIP firmware?
>>>>>
>>>>> Best,
>>>>> Max
>>>>>
>>>>> --
>>>>> Max Clark
>>>>> max [at] clarksys.com
>>>>> http://www.clarksys.com
>>>>>
>>>>>
>>>>> P0S3-06-3-00
>>>>>
>>>>> # SIP Configuration Generic File (start)
>>>>> image_version: P0S3-06-3-00
>>>>> preferred_codec: g711ulaw
>>>>> #preferred_codec: g729a
>>>>>
>>>>> # Proxy Server
>>>>> proxy1_address: "10.6.0.223"
>>>>> proxy2_address: ""
>>>>> proxy3_address: ""
>>>>> proxy4_address: ""
>>>>> proxy5_address: ""
>>>>> proxy6_address: ""
>>>>>
>>>>> # Line 1 Settings
>>>>> line1_name: "Cisco7960" ; Line 1
>>>>> Extension\User ID
>>>>> line1_displayname: "Cisco7960 Line1" ; Line 1 Display Name
>>>>> line1_shortname: "Line1"
>>>>> line1_authname: "Cisco7960"; Line 1 Registration Authentication
>>>>> line1_password: "Cisco7960" ; Line 1 Registration
>>>>> Password
>>>>>
>>>>> # Line 2 Settings
>>>>> line2_name: "" ; Line 2 Extension\User ID
>>>>> line2_displayname: "" ; Line 2 Display Name
>>>>> line2_shortname: ""
>>>>> line2_authname: "" ; Line 2 Registration
>>>>> Authentication
>>>>> line2_password: "" ; Line 2 Registration
>>>>> Password
>>>>>
>>>>> # Line 3 Settings
>>>>> line3_name: "" ; Line 3 Extension\User ID
>>>>> line3_displayname: "" ; Line 3 Display Name
>>>>> line3_shortname: ""
>>>>> line3_authname: "" ; Line 3 Registration
>>>>> Authentication
>>>>> line3_password: "" ; Line 3 Registration Password
>>>>>
>>>>> # Line 4 Settings
>>>>> line4_name: "" ; Line 4 Extension\User ID
>>>>> line4_displayname: "" ; Line 4 Display Name
>>>>> line4_shortname: ""
>>>>> line4_authname: "" ; Line 4 Registration
>>>>> Authentication
>>>>> line4_password: "" ; Line 4 Registration Password
>>>>>
>>>>> # Line 5 Settings
>>>>> line5_name: "" ; Line 5 Extension\User ID
>>>>> line5_displayname: "" ; Line 5 Display Name
>>>>> line5_shortname: ""
>>>>> line5_authname: "" ; Line 5 Registration
>>>>> Authentication
>>>>> line5_password: "" ; Line 5 Registration Password
>>>>>
>>>>> # Line 6 Settings
>>>>> line6_name: "" ; Line 6 Extension\User ID
>>>>> line6_displayname: "" ; Line 6 Display Name
>>>>> line6_shortname: ""
>>>>> line6_authname: "" ; Line 6 Registration
>>>>> Authentication
>>>>> line6_password: "" ; Line 6 Registration Password
>>>>>
>>>>> # Emergency Proxy info
>>>>> proxy_emergency: ""
>>>>> proxy_emergency_port: "5060"
>>>>>
>>>>> # Backup Proxy info
>>>>> proxy_backup: "10.6.0.223"
>>>>> proxy_backup_port: "5060"
>>>>>
>>>>> # Outbound Proxy info
>>>>> outbound_proxy: "10.6.0.223"
>>>>> outbound_proxy_port: "5060"
>>>>>
>>>>> proxy_register: 1
>>>>> timer_register_expires : 120
>>>>> # NAT/Firewall Traversal
>>>>> nat_enable: "1"
>>>>> nat_address: ""
>>>>> voip_control_port: "5060"
>>>>> start_media_port: "16384"
>>>>> end_media_port: "32766"
>>>>> nat_received_processing: "1"
>>>>>
>>>>> # Phone Label (Text desired to be displayed in upper right corner)
>>>>> phone_label: "Garrett - " ; Has no effect on SIP messaging
>>>>>
>>>>> # Time Zone phone will reside in
>>>>> time_zone: PST
>>>>> sntp_server: "136.159.2.254" ; SNTP Server IP Address
>>>>> sntp_mode: directedbroadcast ; unicast, multicast, anycast, or
>>>>> directedbroadcast (default)
>>>>>
>>>>> # Telnet Level (enable or disable the ability to telnet into this
>>>>> phone
>>>>> telnet_level: "2" ; 0-Disabled (default), 1-Enabled,
>>>>> 2-Privileged
>>>>>
>>>>> # Phone prompt/password for telnet/console session
>>>>> phone_prompt: "123" ; Telnet/Console
>>>>> Prompt
>>>>> phone_password: "123" ; Telnet/Console
>>>>> Password
>>>>>
>>>>> # Enable_VAD (1-enabled, 0-disabled)
>>>>> enable_vad: "0"
>>>>>
>>>>> # Network Media Type (auto, full100, full10, half100, half10)
>>>>> network_media_type: "auto"
>>>>> user_info: phone
>>>>> tftp_cfg_dir: "/"
>>>>> sync: 1
>>>>>
>>>>> # URL for external Directory location
>>>>> logo_url: http://www.domain.com/asterisk/tux.bmp
>>>>> #directory_url: http://www.bkw.org/directory.cgi
>>>>> #services_url: http://phone-xml.berbee.com/menu.xml
>>>>> #messages_uri: 300
>>>>> # SIP Configuration Generic File (stop)
>>>>>
>>>>>
>>>>> # SIP Configuration Generic File (start)
>>>>> image_version: P0S3-06-3-00
>>>>> preferred_codec: g711ulaw
>>>>> #preferred_codec: g729a
>>>>>
>>>>> # Proxy Server
>>>>> proxy1_address: "10.6.0.223"
>>>>> proxy2_address: ""
>>>>> proxy3_address: ""
>>>>> proxy4_address: ""
>>>>> proxy5_address: ""
>>>>> proxy6_address: ""
>>>>>
>>>>> # Line 1 Settings
>>>>> line1_name: "Cisco7960" ; Line 1
>>>>> Extension\User ID
>>>>> line1_displayname: "Cisco7960 Line1" ; Line 1 Display Name
>>>>> line1_shortname: "Line1"
>>>>> line1_authname: "Cisco7960"; Line 1 Registration Authentication
>>>>> line1_password: "Cisco7960" ; Line 1 Registration
>>>>> Password
>>>>>
>>>>> # Line 2 Settings
>>>>> line2_name: "" ; Line 2 Extension\User ID
>>>>> line2_displayname: "" ; Line 2 Display Name
>>>>> line2_shortname: ""
>>>>> line2_authname: "" ; Line 2 Registration
>>>>> Authentication
>>>>> line2_password: "" ; Line 2 Registration
>>>>> Password
>>>>>
>>>>> # Line 3 Settings
>>>>> line3_name: "" ; Line 3 Extension\User ID
>>>>> line3_displayname: "" ; Line 3 Display Name
>>>>> line3_shortname: ""
>>>>> line3_authname: "" ; Line 3 Registration
>>>>> Authentication
>>>>> line3_password: "" ; Line 3 Registration Password
>>>>>
>>>>> # Line 4 Settings
>>>>> line4_name: "" ; Line 4 Extension\User ID
>>>>> line4_displayname: "" ; Line 4 Display Name
>>>>> line4_shortname: ""
>>>>> line4_authname: "" ; Line 4 Registration
>>>>> Authentication
>>>>> line4_password: "" ; Line 4 Registration Password
>>>>>
>>>>> # Line 5 Settings
>>>>> line5_name: "" ; Line 5 Extension\User ID
>>>>> line5_displayname: "" ; Line 5 Display Name
>>>>> line5_shortname: ""
>>>>> line5_authname: "" ; Line 5 Registration
>>>>> Authentication
>>>>> line5_password: "" ; Line 5 Registration Password
>>>>>
>>>>> # Line 6 Settings
>>>>> line6_name: "" ; Line 6 Extension\User ID
>>>>> line6_displayname: "" ; Line 6 Display Name
>>>>> line6_shortname: ""
>>>>> line6_authname: "" ; Line 6 Registration
>>>>> Authentication
>>>>> line6_password: "" ; Line 6 Registration Password
>>>>>
>>>>> # Emergency Proxy info
>>>>> proxy_emergency: ""
>>>>> proxy_emergency_port: "5060"
>>>>>
>>>>> # Backup Proxy info
>>>>> proxy_backup: "10.6.0.223"
>>>>> proxy_backup_port: "5060"
>>>>>
>>>>> # Outbound Proxy info
>>>>> outbound_proxy: "10.6.0.223"
>>>>> outbound_proxy_port: "5060"
>>>>>
>>>>> proxy_register: 1
>>>>> timer_register_expires : 120
>>>>> # NAT/Firewall Traversal
>>>>> nat_enable: "1"
>>>>> nat_address: ""
>>>>> voip_control_port: "5060"
>>>>> start_media_port: "16384"
>>>>> end_media_port: "32766"
>>>>> nat_received_processing: "1"
>>>>>
>>>>> # Phone Label (Text desired to be displayed in upper right corner)
>>>>> phone_label: "Garrett - " ; Has no effect on SIP messaging
>>>>>
>>>>> # Time Zone phone will reside in
>>>>> time_zone: PST
>>>>> sntp_server: "136.159.2.254" ; SNTP Server IP Address
>>>>> sntp_mode: directedbroadcast ; unicast, multicast, anycast, or
>>>>> directedbroadcast (default)
>>>>>
>>>>> # Telnet Level (enable or disable the ability to telnet into this
>>>>> phone
>>>>> telnet_level: "2" ; 0-Disabled (default), 1-Enabled,
>>>>> 2-Privileged
>>>>>
>>>>> # Phone prompt/password for telnet/console session
>>>>> phone_prompt: "123" ; Telnet/Console
>>>>> Prompt
>>>>> phone_password: "123" ; Telnet/Console
>>>>> Password
>>>>>
>>>>> # Enable_VAD (1-enabled, 0-disabled)
>>>>> enable_vad: "0"
>>>>>
>>>>> # Network Media Type (auto, full100, full10, half100, half10)
>>>>> network_media_type: "auto"
>>>>> user_info: phone
>>>>> tftp_cfg_dir: "/"
>>>>> sync: 1
>>>>>
>>>>> # URL for external Directory location
>>>>> logo_url: http://www.domain.com/asterisk/tux.bmp
>>>>> #directory_url: http://www.bkw.org/directory.cgi
>>>>> #services_url: http://phone-xml.berbee.com/menu.xml
>>>>> #messages_uri: 300
>>>>> # SIP Configuration Generic File (stop)
>>>>>
>>>>>
>>>>> # SIP Configuration Generic File (start)
>>>>> image_version: P0S3-06-3-00
>>>>> preferred_codec: g711ulaw
>>>>> #preferred_codec: g729a
>>>>>
>>>>> # Proxy Server
>>>>> proxy1_address: "10.6.0.223"
>>>>> proxy2_address: ""
>>>>> proxy3_address: ""
>>>>> proxy4_address: ""
>>>>> proxy5_address: ""
>>>>> proxy6_address: ""
>>>>>
>>>>> # Line 1 Settings
>>>>> line1_name: "Cisco7960" ; Line 1
>>>>> Extension\User ID
>>>>> line1_displayname: "Cisco7960 Line1" ; Line 1 Display Name
>>>>> line1_shortname: "Line1"
>>>>> line1_authname: "Cisco7960"; Line 1 Registration Authentication
>>>>> line1_password: "Cisco7960" ; Line 1 Registration
>>>>> Password
>>>>>
>>>>> # Line 2 Settings
>>>>> line2_name: "" ; Line 2 Extension\User ID
>>>>> line2_displayname: "" ; Line 2 Display Name
>>>>> line2_shortname: ""
>>>>> line2_authname: "" ; Line 2 Registration
>>>>> Authentication
>>>>> line2_password: "" ; Line 2 Registration
>>>>> Password
>>>>>
>>>>> # Line 3 Settings
>>>>> line3_name: "" ; Line 3 Extension\User ID
>>>>> line3_displayname: "" ; Line 3 Display Name
>>>>> line3_shortname: ""
>>>>> line3_authname: "" ; Line 3 Registration
>>>>> Authentication
>>>>> line3_password: "" ; Line 3 Registration Password
>>>>>
>>>>> # Line 4 Settings
>>>>> line4_name: "" ; Line 4 Extension\User ID
>>>>> line4_displayname: "" ; Line 4 Display Name
>>>>> line4_shortname: ""
>>>>> line4_authname: "" ; Line 4 Registration
>>>>> Authentication
>>>>> line4_password: "" ; Line 4 Registration Password
>>>>>
>>>>> # Line 5 Settings
>>>>> line5_name: "" ; Line 5 Extension\User ID
>>>>> line5_displayname: "" ; Line 5 Display Name
>>>>> line5_shortname: ""
>>>>> line5_authname: "" ; Line 5 Registration
>>>>> Authentication
>>>>> line5_password: "" ; Line 5 Registration Password
>>>>>
>>>>> # Line 6 Settings
>>>>> line6_name: "" ; Line 6 Extension\User ID
>>>>> line6_displayname: "" ; Line 6 Display Name
>>>>> line6_shortname: ""
>>>>> line6_authname: "" ; Line 6 Registration
>>>>> Authentication
>>>>> line6_password: "" ; Line 6 Registration Password
>>>>>
>>>>> # Emergency Proxy info
>>>>> proxy_emergency: ""
>>>>> proxy_emergency_port: "5060"
>>>>>
>>>>> # Backup Proxy info
>>>>> proxy_backup: "10.6.0.223"
>>>>> proxy_backup_port: "5060"
>>>>>
>>>>> # Outbound Proxy info
>>>>> outbound_proxy: "10.6.0.223"
>>>>> outbound_proxy_port: "5060"
>>>>>
>>>>> proxy_register: 1
>>>>> timer_register_expires : 120
>>>>> # NAT/Firewall Traversal
>>>>> nat_enable: "1"
>>>>> nat_address: ""
>>>>> voip_control_port: "5060"
>>>>> start_media_port: "16384"
>>>>> end_media_port: "32766"
>>>>> nat_received_processing: "1"
>>>>>
>>>>> # Phone Label (Text desired to be displayed in upper right corner)
>>>>> phone_label: "Garrett - " ; Has no effect on SIP messaging
>>>>>
>>>>> # Time Zone phone will reside in
>>>>> time_zone: PST
>>>>> sntp_server: "136.159.2.254" ; SNTP Server IP Address
>>>>> sntp_mode: directedbroadcast ; unicast, multicast, anycast, or
>>>>> directedbroadcast (default)
>>>>>
>>>>> # Telnet Level (enable or disable the ability to telnet into this
>>>>> phone
>>>>> telnet_level: "2" ; 0-Disabled (default), 1-Enabled,
>>>>> 2-Privileged
>>>>>
>>>>> # Phone prompt/password for telnet/console session
>>>>> phone_prompt: "123" ; Telnet/Console
>>>>> Prompt
>>>>> phone_password: "123" ; Telnet/Console
>>>>> Password
>>>>>
>>>>> # Enable_VAD (1-enabled, 0-disabled)
>>>>> enable_vad: "0"
>>>>>
>>>>> # Network Media Type (auto, full100, full10, half100, half10)
>>>>> network_media_type: "auto"
>>>>> user_info: phone
>>>>> tftp_cfg_dir: "/"
>>>>> sync: 1
>>>>>
>>>>> # URL for external Directory location
>>>>> logo_url: http://www.domain.com/asterisk/tux.bmp
>>>>> #directory_url: http://www.bkw.org/directory.cgi
>>>>> #services_url: http://phone-xml.berbee.com/menu.xml
>>>>> #messages_uri: 300
>>>>> # SIP Configuration Generic File (stop)
>>>>>
>>>>>
>>>>> # SIP Configuration Generic File (start)
>>>>> image_version: P0S3-06-3-00
>>>>> preferred_codec: g711ulaw
>>>>> #preferred_codec: g729a
>>>>>
>>>>> # Proxy Server
>>>>> proxy1_address: "10.6.0.223"
>>>>> proxy2_address: ""
>>>>> proxy3_address: ""
>>>>> proxy4_address: ""
>>>>> proxy5_address: ""
>>>>> proxy6_address: ""
>>>>>
>>>>> # Line 1 Settings
>>>>> line1_name: "Cisco7960" ; Line 1
>>>>> Extension\User ID
>>>>> line1_displayname: "Cisco7960 Line1" ; Line 1 Display Name
>>>>> line1_shortname: "Line1"
>>>>> line1_authname: "Cisco7960"; Line 1 Registration Authentication
>>>>> line1_password: "Cisco7960" ; Line 1 Registration
>>>>> Password
>>>>>
>>>>> # Line 2 Settings
>>>>> line2_name: "" ; Line 2 Extension\User ID
>>>>> line2_displayname: "" ; Line 2 Display Name
>>>>> line2_shortname: ""
>>>>> line2_authname: "" ; Line 2 Registration
>>>>> Authentication
>>>>> line2_password: "" ; Line 2 Registration
>>>>> Password
>>>>>
>>>>> # Line 3 Settings
>>>>> line3_name: "" ; Line 3 Extension\User ID
>>>>> line3_displayname: "" ; Line 3 Display Name
>>>>> line3_shortname: ""
>>>>> line3_authname: "" ; Line 3 Registration
>>>>> Authentication
>>>>> line3_password: "" ; Line 3 Registration Password
>>>>>
>>>>> # Line 4 Settings
>>>>> line4_name: "" ; Line 4 Extension\User ID
>>>>> line4_displayname: "" ; Line 4 Display Name
>>>>> line4_shortname: ""
>>>>> line4_authname: "" ; Line 4 Registration
>>>>> Authentication
>>>>> line4_password: "" ; Line 4 Registration Password
>>>>>
>>>>> # Line 5 Settings
>>>>> line5_name: "" ; Line 5 Extension\User ID
>>>>> line5_displayname: "" ; Line 5 Display Name
>>>>> line5_shortname: ""
>>>>> line5_authname: "" ; Line 5 Registration
>>>>> Authentication
>>>>> line5_password: "" ; Line 5 Registration Password
>>>>>
>>>>> # Line 6 Settings
>>>>> line6_name: "" ; Line 6 Extension\User ID
>>>>> line6_displayname: "" ; Line 6 Display Name
>>>>> line6_shortname: ""
>>>>> line6_authname: "" ; Line 6 Registration
>>>>> Authentication
>>>>> line6_password: "" ; Line 6 Registration Password
>>>>>
>>>>> # Emergency Proxy info
>>>>> proxy_emergency: ""
>>>>> proxy_emergency_port: "5060"
>>>>>
>>>>> # Backup Proxy info
>>>>> proxy_backup: "10.6.0.223"
>>>>> proxy_backup_port: "5060"
>>>>>
>>>>> # Outbound Proxy info
>>>>> outbound_proxy: "10.6.0.223"
>>>>> outbound_proxy_port: "5060"
>>>>>
>>>>> proxy_register: 1
>>>>> timer_register_expires : 120
>>>>> # NAT/Firewall Traversal
>>>>> nat_enable: "1"
>>>>> nat_address: ""
>>>>> voip_control_port: "5060"
>>>>> start_media_port: "16384"
>>>>> end_media_port: "32766"
>>>>> nat_received_processing: "1"
>>>>>
>>>>> # Phone Label (Text desired to be displayed in upper right corner)
>>>>> phone_label: "Garrett - " ; Has no effect on SIP messaging
>>>>>
>>>>> # Time Zone phone will reside in
>>>>> time_zone: PST
>>>>> sntp_server: "136.159.2.254" ; SNTP Server IP Address
>>>>> sntp_mode: directedbroadcast ; unicast, multicast, anycast, or
>>>>> directedbroadcast (default)
>>>>>
>>>>> # Telnet Level (enable or disable the ability to telnet into this
>>>>> phone
>>>>> telnet_level: "2" ; 0-Disabled (default), 1-Enabled,
>>>>> 2-Privileged
>>>>>
>>>>> # Phone prompt/password for telnet/console session
>>>>> phone_prompt: "123" ; Telnet/Console
>>>>> Prompt
>>>>> phone_password: "123" ; Telnet/Console
>>>>> Password
>>>>>
>>>>> # Enable_VAD (1-enabled, 0-disabled)
>>>>> enable_vad: "0"
>>>>>
>>>>> # Network Media Type (auto, full100, full10, half100, half10)
>>>>> network_media_type: "auto"
>>>>> user_info: phone
>>>>> tftp_cfg_dir: "/"
>>>>> sync: 1
>>>>>
>>>>> # URL for external Directory location
>>>>> logo_url: http://www.domain.com/asterisk/tux.bmp
>>>>> #directory_url: http://www.bkw.org/directory.cgi
>>>>> #services_url: http://phone-xml.berbee.com/menu.xml
>>>>> #messages_uri: 300
>>>>> # SIP Configuration Generic File (stop)
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Asterisk-Users mailing list
>>>>> Asterisk-Users at lists.digium.com
>>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>> To UNSUBSCRIBE or update options visit:
>>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> Asterisk-Users mailing list
>>>> Asterisk-Users at lists.digium.com
>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>> To UNSUBSCRIBE or update options visit:
>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>
>>>
>>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
More information about the asterisk-users
mailing list