[Asterisk-Users] Cisco 7960 Beating a Dead Horse
Max Clark
max at clarksys.com
Wed Feb 9 14:16:36 MST 2005
BJ,
I tried removing the SEP* files and changing the OS79XX.TXT to the 7.3
version of the firmware and then got the message below in my tftpd server.
How do I check the version of the Firmware that the phone is running?
Based on what you said I have a feeling that I need to go way back in
version numbers to get current.
Thanks,
Max
Connection received from 10.6.0.224 on port 50608 [09/02 13:14:02.218]
Read request for file <OS79XX.TXT>. Mode octet [09/02 13:14:02.234]
<OS79XX.TXT>: sent 1 blk, 12 bytes in 0 s. 0 blk resent [09/02 13:14:02.234]
Connection received from 10.6.0.224 on port 50609 [09/02 13:14:02.234]
Read request for file <P0S3-07-.bin>. Mode octet [09/02 13:14:02.234]
File <P0S3-07-.bin> : error 2 in system call CreateFile The system
cannot find the file specified. [09/02 13:14:02.234]
Connection received from 10.6.0.224 on port 50610 [09/02 13:14:02.234]
Read request for file <SEP0007EB0630A6.cnf>. Mode octet [09/02 13:14:02.250]
File <SEP0007EB0630A6.cnf> : error 2 in system call CreateFile The
system cannot find the file specified. [09/02 13:14:02.250]
Connection received from 10.6.0.224 on port 50611 [09/02 13:14:02.250]
Read request for file <SEPDefault.cnf>. Mode octet [09/02 13:14:02.250]
File <SEPDefault.cnf> : error 2 in system call CreateFile The system
cannot find the file specified. [09/02 13:14:02.250]
Max Clark
max [at] clarksys.com
http://www.clarksys.com
BJ Weschke wrote:
> You're probably going to want to go ahead and remove the SEP<mac
> address>.cnf.xml file from the TFTP server and leave the SIP<mac
> address>.cnf file in place.
>
> I think with version 6 or 7 of the firmware (don't recall which one -
> probably the one that starts using the Universal App Loader) the phone
> starts looking for the SEP<mac address>.cnf.xml file and will default
> to call manager mode if it finds it.
>
> Additionally, once you get into v7.x of the firmware, the OS79XX.TXT
> file goes from P0S3-XX-X-XX to P0O3-XX-X-XX even though you're going
> to use SIP. SIPDefault.cnf then contains the version of the software
> you actually want to use:
>
> # eg..
>
> # SIP Default Generic Configuration File
>
> # Image Version
> image_version: P0S3-07-3-00
>
> This threw me for a loop initially as my phone factory shipped with
> v3.3 of a factory image and while upgrading up through the versions,
> you had to initially indicate in OS79XX.TXT whether or not you were
> going to do SIP or SCCP via the string that was in OS79XX.TXT. With
> the UAL, you no longer do it that way. :-/
>
>
> On Wed, 09 Feb 2005 12:20:01 -0800, Max Clark <max at clarksys.com> wrote:
>
>>Hi all,
>>
>>So I have been reading through the docs available online and the
>>different threads on this list, but I cannot seem to get this phone to work.
>>
>>I have configured the OS79XX.TXT and SIP/SEP*.cnf files (see attached),
>>when I configure the phone to point to my tftp server and reboot it I
>>get this message:
>>
>>Connection received from 10.6.0.224 on port 50608 [09/02 12:16:11.750]
>>Read request for file <OS79XX.TXT>. Mode octet [09/02 12:16:11.750]
>><OS79XX.TXT>: sent 1 blk, 12 bytes in 0 s. 0 blk resent [09/02 12:16:11.750]
>>Connection received from 10.6.0.224 on port 50609 [09/02 12:16:11.750]
>>Read request for file <P0S3-06-.bin>. Mode octet [09/02 12:16:11.765]
>>File <P0S3-06-.bin> : error 2 in system call CreateFile The system
>>cannot find the file specified. [09/02 12:16:11.765]
>>Connection received from 10.6.0.224 on port 50610 [09/02 12:16:11.765]
>>Read request for file <SEP0007EB0630A6.cnf>. Mode octet [09/02 12:16:11.765]
>><SEP0007EB0630A6.cnf>: sent 7 blks, 3469 bytes in 0 s. 0 blk resent
>>[09/02 12:16:11.781]
>>
>>Which lead me to believe that there was an 8.3 naming issue when using a
>>windows based tftpd server. So I changed the file names of my image to
>>an 8.3 structure, updated the configuration files and rebooted. After I
>>do that I see the request and transfer of the OS79XX.TXT and the
>>SEP0007EB0630A6.cnf but nothing for the firmware, or anything about the
>>SIP configuration files.
>>
>>Just out of curiostity looking at my phone config at this point the call
>>manager is pointing to the tftp server.
>>
>>What gives? How do I get this phone to download the SIP firmware?
>>
>>Best,
>>Max
>>
>>--
>> Max Clark
>> max [at] clarksys.com
>> http://www.clarksys.com
>>
>>
>>P0S3-06-3-00
>>
>># SIP Configuration Generic File (start)
>>image_version: P0S3-06-3-00
>>preferred_codec: g711ulaw
>>#preferred_codec: g729a
>>
>># Proxy Server
>>proxy1_address: "10.6.0.223"
>>proxy2_address: ""
>>proxy3_address: ""
>>proxy4_address: ""
>>proxy5_address: ""
>>proxy6_address: ""
>>
>># Line 1 Settings
>>line1_name: "Cisco7960" ; Line 1 Extension\User ID
>>line1_displayname: "Cisco7960 Line1" ; Line 1 Display Name
>>line1_shortname: "Line1"
>>line1_authname: "Cisco7960"; Line 1 Registration Authentication
>>line1_password: "Cisco7960" ; Line 1 Registration Password
>>
>># Line 2 Settings
>>line2_name: "" ; Line 2 Extension\User ID
>>line2_displayname: "" ; Line 2 Display Name
>>line2_shortname: ""
>>line2_authname: "" ; Line 2 Registration Authentication
>>line2_password: "" ; Line 2 Registration Password
>>
>># Line 3 Settings
>>line3_name: "" ; Line 3 Extension\User ID
>>line3_displayname: "" ; Line 3 Display Name
>>line3_shortname: ""
>>line3_authname: "" ; Line 3 Registration Authentication
>>line3_password: "" ; Line 3 Registration Password
>>
>># Line 4 Settings
>>line4_name: "" ; Line 4 Extension\User ID
>>line4_displayname: "" ; Line 4 Display Name
>>line4_shortname: ""
>>line4_authname: "" ; Line 4 Registration Authentication
>>line4_password: "" ; Line 4 Registration Password
>>
>># Line 5 Settings
>>line5_name: "" ; Line 5 Extension\User ID
>>line5_displayname: "" ; Line 5 Display Name
>>line5_shortname: ""
>>line5_authname: "" ; Line 5 Registration Authentication
>>line5_password: "" ; Line 5 Registration Password
>>
>># Line 6 Settings
>>line6_name: "" ; Line 6 Extension\User ID
>>line6_displayname: "" ; Line 6 Display Name
>>line6_shortname: ""
>>line6_authname: "" ; Line 6 Registration Authentication
>>line6_password: "" ; Line 6 Registration Password
>>
>># Emergency Proxy info
>>proxy_emergency: ""
>>proxy_emergency_port: "5060"
>>
>># Backup Proxy info
>>proxy_backup: "10.6.0.223"
>>proxy_backup_port: "5060"
>>
>># Outbound Proxy info
>>outbound_proxy: "10.6.0.223"
>>outbound_proxy_port: "5060"
>>
>>proxy_register: 1
>>timer_register_expires : 120
>># NAT/Firewall Traversal
>>nat_enable: "1"
>>nat_address: ""
>>voip_control_port: "5060"
>>start_media_port: "16384"
>>end_media_port: "32766"
>>nat_received_processing: "1"
>>
>># Phone Label (Text desired to be displayed in upper right corner)
>>phone_label: "Garrett - " ; Has no effect on SIP messaging
>>
>># Time Zone phone will reside in
>>time_zone: PST
>>sntp_server: "136.159.2.254" ; SNTP Server IP Address
>>sntp_mode: directedbroadcast ; unicast, multicast, anycast, or directedbroadcast (default)
>>
>># Telnet Level (enable or disable the ability to telnet into this phone
>>telnet_level: "2" ; 0-Disabled (default), 1-Enabled, 2-Privileged
>>
>># Phone prompt/password for telnet/console session
>>phone_prompt: "123" ; Telnet/Console Prompt
>>phone_password: "123" ; Telnet/Console Password
>>
>># Enable_VAD (1-enabled, 0-disabled)
>>enable_vad: "0"
>>
>># Network Media Type (auto, full100, full10, half100, half10)
>>network_media_type: "auto"
>>user_info: phone
>>tftp_cfg_dir: "/"
>>sync: 1
>>
>># URL for external Directory location
>>logo_url: http://www.domain.com/asterisk/tux.bmp
>>#directory_url: http://www.bkw.org/directory.cgi
>>#services_url: http://phone-xml.berbee.com/menu.xml
>>#messages_uri: 300
>># SIP Configuration Generic File (stop)
>>
>>
>># SIP Configuration Generic File (start)
>>image_version: P0S3-06-3-00
>>preferred_codec: g711ulaw
>>#preferred_codec: g729a
>>
>># Proxy Server
>>proxy1_address: "10.6.0.223"
>>proxy2_address: ""
>>proxy3_address: ""
>>proxy4_address: ""
>>proxy5_address: ""
>>proxy6_address: ""
>>
>># Line 1 Settings
>>line1_name: "Cisco7960" ; Line 1 Extension\User ID
>>line1_displayname: "Cisco7960 Line1" ; Line 1 Display Name
>>line1_shortname: "Line1"
>>line1_authname: "Cisco7960"; Line 1 Registration Authentication
>>line1_password: "Cisco7960" ; Line 1 Registration Password
>>
>># Line 2 Settings
>>line2_name: "" ; Line 2 Extension\User ID
>>line2_displayname: "" ; Line 2 Display Name
>>line2_shortname: ""
>>line2_authname: "" ; Line 2 Registration Authentication
>>line2_password: "" ; Line 2 Registration Password
>>
>># Line 3 Settings
>>line3_name: "" ; Line 3 Extension\User ID
>>line3_displayname: "" ; Line 3 Display Name
>>line3_shortname: ""
>>line3_authname: "" ; Line 3 Registration Authentication
>>line3_password: "" ; Line 3 Registration Password
>>
>># Line 4 Settings
>>line4_name: "" ; Line 4 Extension\User ID
>>line4_displayname: "" ; Line 4 Display Name
>>line4_shortname: ""
>>line4_authname: "" ; Line 4 Registration Authentication
>>line4_password: "" ; Line 4 Registration Password
>>
>># Line 5 Settings
>>line5_name: "" ; Line 5 Extension\User ID
>>line5_displayname: "" ; Line 5 Display Name
>>line5_shortname: ""
>>line5_authname: "" ; Line 5 Registration Authentication
>>line5_password: "" ; Line 5 Registration Password
>>
>># Line 6 Settings
>>line6_name: "" ; Line 6 Extension\User ID
>>line6_displayname: "" ; Line 6 Display Name
>>line6_shortname: ""
>>line6_authname: "" ; Line 6 Registration Authentication
>>line6_password: "" ; Line 6 Registration Password
>>
>># Emergency Proxy info
>>proxy_emergency: ""
>>proxy_emergency_port: "5060"
>>
>># Backup Proxy info
>>proxy_backup: "10.6.0.223"
>>proxy_backup_port: "5060"
>>
>># Outbound Proxy info
>>outbound_proxy: "10.6.0.223"
>>outbound_proxy_port: "5060"
>>
>>proxy_register: 1
>>timer_register_expires : 120
>># NAT/Firewall Traversal
>>nat_enable: "1"
>>nat_address: ""
>>voip_control_port: "5060"
>>start_media_port: "16384"
>>end_media_port: "32766"
>>nat_received_processing: "1"
>>
>># Phone Label (Text desired to be displayed in upper right corner)
>>phone_label: "Garrett - " ; Has no effect on SIP messaging
>>
>># Time Zone phone will reside in
>>time_zone: PST
>>sntp_server: "136.159.2.254" ; SNTP Server IP Address
>>sntp_mode: directedbroadcast ; unicast, multicast, anycast, or directedbroadcast (default)
>>
>># Telnet Level (enable or disable the ability to telnet into this phone
>>telnet_level: "2" ; 0-Disabled (default), 1-Enabled, 2-Privileged
>>
>># Phone prompt/password for telnet/console session
>>phone_prompt: "123" ; Telnet/Console Prompt
>>phone_password: "123" ; Telnet/Console Password
>>
>># Enable_VAD (1-enabled, 0-disabled)
>>enable_vad: "0"
>>
>># Network Media Type (auto, full100, full10, half100, half10)
>>network_media_type: "auto"
>>user_info: phone
>>tftp_cfg_dir: "/"
>>sync: 1
>>
>># URL for external Directory location
>>logo_url: http://www.domain.com/asterisk/tux.bmp
>>#directory_url: http://www.bkw.org/directory.cgi
>>#services_url: http://phone-xml.berbee.com/menu.xml
>>#messages_uri: 300
>># SIP Configuration Generic File (stop)
>>
>>
>># SIP Configuration Generic File (start)
>>image_version: P0S3-06-3-00
>>preferred_codec: g711ulaw
>>#preferred_codec: g729a
>>
>># Proxy Server
>>proxy1_address: "10.6.0.223"
>>proxy2_address: ""
>>proxy3_address: ""
>>proxy4_address: ""
>>proxy5_address: ""
>>proxy6_address: ""
>>
>># Line 1 Settings
>>line1_name: "Cisco7960" ; Line 1 Extension\User ID
>>line1_displayname: "Cisco7960 Line1" ; Line 1 Display Name
>>line1_shortname: "Line1"
>>line1_authname: "Cisco7960"; Line 1 Registration Authentication
>>line1_password: "Cisco7960" ; Line 1 Registration Password
>>
>># Line 2 Settings
>>line2_name: "" ; Line 2 Extension\User ID
>>line2_displayname: "" ; Line 2 Display Name
>>line2_shortname: ""
>>line2_authname: "" ; Line 2 Registration Authentication
>>line2_password: "" ; Line 2 Registration Password
>>
>># Line 3 Settings
>>line3_name: "" ; Line 3 Extension\User ID
>>line3_displayname: "" ; Line 3 Display Name
>>line3_shortname: ""
>>line3_authname: "" ; Line 3 Registration Authentication
>>line3_password: "" ; Line 3 Registration Password
>>
>># Line 4 Settings
>>line4_name: "" ; Line 4 Extension\User ID
>>line4_displayname: "" ; Line 4 Display Name
>>line4_shortname: ""
>>line4_authname: "" ; Line 4 Registration Authentication
>>line4_password: "" ; Line 4 Registration Password
>>
>># Line 5 Settings
>>line5_name: "" ; Line 5 Extension\User ID
>>line5_displayname: "" ; Line 5 Display Name
>>line5_shortname: ""
>>line5_authname: "" ; Line 5 Registration Authentication
>>line5_password: "" ; Line 5 Registration Password
>>
>># Line 6 Settings
>>line6_name: "" ; Line 6 Extension\User ID
>>line6_displayname: "" ; Line 6 Display Name
>>line6_shortname: ""
>>line6_authname: "" ; Line 6 Registration Authentication
>>line6_password: "" ; Line 6 Registration Password
>>
>># Emergency Proxy info
>>proxy_emergency: ""
>>proxy_emergency_port: "5060"
>>
>># Backup Proxy info
>>proxy_backup: "10.6.0.223"
>>proxy_backup_port: "5060"
>>
>># Outbound Proxy info
>>outbound_proxy: "10.6.0.223"
>>outbound_proxy_port: "5060"
>>
>>proxy_register: 1
>>timer_register_expires : 120
>># NAT/Firewall Traversal
>>nat_enable: "1"
>>nat_address: ""
>>voip_control_port: "5060"
>>start_media_port: "16384"
>>end_media_port: "32766"
>>nat_received_processing: "1"
>>
>># Phone Label (Text desired to be displayed in upper right corner)
>>phone_label: "Garrett - " ; Has no effect on SIP messaging
>>
>># Time Zone phone will reside in
>>time_zone: PST
>>sntp_server: "136.159.2.254" ; SNTP Server IP Address
>>sntp_mode: directedbroadcast ; unicast, multicast, anycast, or directedbroadcast (default)
>>
>># Telnet Level (enable or disable the ability to telnet into this phone
>>telnet_level: "2" ; 0-Disabled (default), 1-Enabled, 2-Privileged
>>
>># Phone prompt/password for telnet/console session
>>phone_prompt: "123" ; Telnet/Console Prompt
>>phone_password: "123" ; Telnet/Console Password
>>
>># Enable_VAD (1-enabled, 0-disabled)
>>enable_vad: "0"
>>
>># Network Media Type (auto, full100, full10, half100, half10)
>>network_media_type: "auto"
>>user_info: phone
>>tftp_cfg_dir: "/"
>>sync: 1
>>
>># URL for external Directory location
>>logo_url: http://www.domain.com/asterisk/tux.bmp
>>#directory_url: http://www.bkw.org/directory.cgi
>>#services_url: http://phone-xml.berbee.com/menu.xml
>>#messages_uri: 300
>># SIP Configuration Generic File (stop)
>>
>>
>># SIP Configuration Generic File (start)
>>image_version: P0S3-06-3-00
>>preferred_codec: g711ulaw
>>#preferred_codec: g729a
>>
>># Proxy Server
>>proxy1_address: "10.6.0.223"
>>proxy2_address: ""
>>proxy3_address: ""
>>proxy4_address: ""
>>proxy5_address: ""
>>proxy6_address: ""
>>
>># Line 1 Settings
>>line1_name: "Cisco7960" ; Line 1 Extension\User ID
>>line1_displayname: "Cisco7960 Line1" ; Line 1 Display Name
>>line1_shortname: "Line1"
>>line1_authname: "Cisco7960"; Line 1 Registration Authentication
>>line1_password: "Cisco7960" ; Line 1 Registration Password
>>
>># Line 2 Settings
>>line2_name: "" ; Line 2 Extension\User ID
>>line2_displayname: "" ; Line 2 Display Name
>>line2_shortname: ""
>>line2_authname: "" ; Line 2 Registration Authentication
>>line2_password: "" ; Line 2 Registration Password
>>
>># Line 3 Settings
>>line3_name: "" ; Line 3 Extension\User ID
>>line3_displayname: "" ; Line 3 Display Name
>>line3_shortname: ""
>>line3_authname: "" ; Line 3 Registration Authentication
>>line3_password: "" ; Line 3 Registration Password
>>
>># Line 4 Settings
>>line4_name: "" ; Line 4 Extension\User ID
>>line4_displayname: "" ; Line 4 Display Name
>>line4_shortname: ""
>>line4_authname: "" ; Line 4 Registration Authentication
>>line4_password: "" ; Line 4 Registration Password
>>
>># Line 5 Settings
>>line5_name: "" ; Line 5 Extension\User ID
>>line5_displayname: "" ; Line 5 Display Name
>>line5_shortname: ""
>>line5_authname: "" ; Line 5 Registration Authentication
>>line5_password: "" ; Line 5 Registration Password
>>
>># Line 6 Settings
>>line6_name: "" ; Line 6 Extension\User ID
>>line6_displayname: "" ; Line 6 Display Name
>>line6_shortname: ""
>>line6_authname: "" ; Line 6 Registration Authentication
>>line6_password: "" ; Line 6 Registration Password
>>
>># Emergency Proxy info
>>proxy_emergency: ""
>>proxy_emergency_port: "5060"
>>
>># Backup Proxy info
>>proxy_backup: "10.6.0.223"
>>proxy_backup_port: "5060"
>>
>># Outbound Proxy info
>>outbound_proxy: "10.6.0.223"
>>outbound_proxy_port: "5060"
>>
>>proxy_register: 1
>>timer_register_expires : 120
>># NAT/Firewall Traversal
>>nat_enable: "1"
>>nat_address: ""
>>voip_control_port: "5060"
>>start_media_port: "16384"
>>end_media_port: "32766"
>>nat_received_processing: "1"
>>
>># Phone Label (Text desired to be displayed in upper right corner)
>>phone_label: "Garrett - " ; Has no effect on SIP messaging
>>
>># Time Zone phone will reside in
>>time_zone: PST
>>sntp_server: "136.159.2.254" ; SNTP Server IP Address
>>sntp_mode: directedbroadcast ; unicast, multicast, anycast, or directedbroadcast (default)
>>
>># Telnet Level (enable or disable the ability to telnet into this phone
>>telnet_level: "2" ; 0-Disabled (default), 1-Enabled, 2-Privileged
>>
>># Phone prompt/password for telnet/console session
>>phone_prompt: "123" ; Telnet/Console Prompt
>>phone_password: "123" ; Telnet/Console Password
>>
>># Enable_VAD (1-enabled, 0-disabled)
>>enable_vad: "0"
>>
>># Network Media Type (auto, full100, full10, half100, half10)
>>network_media_type: "auto"
>>user_info: phone
>>tftp_cfg_dir: "/"
>>sync: 1
>>
>># URL for external Directory location
>>logo_url: http://www.domain.com/asterisk/tux.bmp
>>#directory_url: http://www.bkw.org/directory.cgi
>>#services_url: http://phone-xml.berbee.com/menu.xml
>>#messages_uri: 300
>># SIP Configuration Generic File (stop)
>>
>>
>>_______________________________________________
>>Asterisk-Users mailing list
>>Asterisk-Users at lists.digium.com
>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
More information about the asterisk-users
mailing list