[Asterisk-Users] 2 x Fritz!pci card

[Oga]

Before switching to another distro, I'll spend some time diving into the 
code trying to understand what's going wrong.
I'll let you know if I find something, or maybe someone else have 
already tried ?
Olivier

Andrew Yager a écrit :

> I'm actually in the process of answering this question for another 
> person :-) Basically, it doesn't work with a 2.6 kernel. Not sure why 
> - haven't had the time to be able to find out why either.
>
> Try centos - it's a port of red hat enterprise linux which (I think) 
> supports the nforce 2 chipset and afaik still uses the 2.4 kernel.
>
> Andrew
>
> On Feb 8, 2005, at 9:50 AM, Oga wrote:
>
>> Thank you dave, but my chipset (NVIDIA nForce 2) is not supported by 
>> kernel 2.4
>>
>> Dave Cotton a écrit :
>>
>>> On Mon, 2005-02-07 at 21:20 +0100, Oga wrote:
>>>
>>>> Hello,
>>>>
>>>> Has anybody installed 2 Fritz pci cards in an asterisk box ?
>>>>
>>>
>>> Yes
>>>
>>>
>>>> I can't make them work : each card is working fine when installed 
>>>> alone (with chan_capi), but I get a kernel freeze when doing 
>>>> 'insmod' with both cards installed.
>>>> I am using Mandrake 10.1 with kernel 2.6, so the hack described at 
>>>> http://www.quiss.org/caiviar/Two-Fritzcards-HOWTO cannot be used 
>>>> (the hack requires fcpci driver version below 8.2 and I need to use 
>>>> the 9.1 driver).
>>>>
>>>
>>> Then use a 2.4 kernel and everything will work as advertised.
>>>
>>>
>>>
>>>
>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>