[Asterisk-Users] IAXy Hung, Power-cycle Required

[Adams, Gavin-ML]

Has anyone had good success with the IAXy? I've tried everything
including PAT on the IAX2 port to the IAXy device to no avail (using the
alternate server parameter). I guess a call to Digium is in order!


Regards, 
--- Gavin Adams 
Promisant (USA) Inc. 
O: 770-913-3727 F: 770-913-3726 
________________________________________
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Bryan
Field-Elliot
Sent: Tuesday, February 01, 2005 9:55 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] IAXy Hung, Power-cycle Required

On Wed, 2005-01-26 at 15:59 -0500, Paul Dugas wrote: 

I've got a single IAXy installed in a little office nearby and got a
call
from someone on site a finew mintues ago.  Apparently they couldn't make
a
call on that extension.  They'd pick up the phone and get nothing; no
dial-tone.



Has snyone else had trouble with these things sticking like this?

Paul


Yes - we are having the exact same problem with a portion of our IAXys
in the field. In all cases the IAXys are behind simple SOHO firewalls
like the Linksys. After an idle period - perhaps 1-3 days - they just
stop working, in both directions, but a simple power cycle restores
functionality.

We have an open support incident with Digium but have not yet heard
back. FWIW we have stopped selling & deploying the IAXys until we have a
resolution to the problem.

Bryan