[Asterisk-Users] Cisco 7960G phone crashes during SIP upgrade

[Matt Schulte]

Which sip ver are you trying to install. Is it stuck in a loop or
anything?

-----Original Message-----
From: Nicolas Chabbey [mailto:epromix at gmail.com] 
Sent: Thursday, February 03, 2005 7:18 AM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Cisco 7960G phone crashes during SIP upgrade


Hello,

I've recently received a Cisco 7960G phone with the factory default SCCP
firmware on it. As we're using SIP on our network, the first things i've
done was to upgrade but unfortunately the phone just restarted. By
looking on the TFTP logs and tcpump output, i've seen that the phone
crashed and restarted just after downloading the OS79XX.TXT file,
without requesting the image file at any moment.

If i'm putting a SCCP image file name (without ext.) on the OS79XX.TXT
(begining with P003), the phone doesn't crash and request the respective
SEP<mac>.xml file. Unfortunately (again), just after downloading the xml
configuration it hang and restart. I've checked the syntax and they's no
error on it, if they's one the phone output the error on the display
without crashing. Note that i've both put with and without the load
information statement, with the same result.

Both statical and DHCP configuration has been tried.
Maybe it's an hardware failure or i've miss somethings realy important
:)

Thanks

-------------------------------------------------
Nicolas Chabbey <eprom at bgp6.info>
Leafnet Networking Research Laboratory
http://www.bgp6.info
-------------------------------------------------
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users