[Asterisk-Users] Linksys PAP2 / RT31P2 + multiple G.729 calls

[Matthew Boehm]

eh..

they told me it was a CPU problem. that v1 of the pap2na didn't have the
horsepower to transcode 2 channels.

anyone know if the Sipura 2100 can do 2 simul 729 calls?

-Matthew

----- Original Message ----- 
From: "Matt Klein" <mklein at nmedia.net>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Sent: Wednesday, February 02, 2005 3:43 PM
Subject: Re: [Asterisk-Users] Linksys PAP2 / RT31P2 + multiple G.729 calls


> of course it won't. neither can the ata.
>
> they're cheap, it was a licensing decision.
>
> i look forward to v2.
>
> -m
>
> On Wed, 2 Feb 2005, Matthew Boehm wrote:
>
> > Holy Crap!!!!
> >
> > I have just verified this! The linksys PAP2-NA will NOT SUPPORT 2
> > SIMULTANEOUS G729 CALLS!
> >
> > And I just got off the phone with some super-level technician at linksys
and
> > he said they knew this all along!!
> > What bastards!
> >
> > Anyway, he told me they are comming out with the PAP2-NAv2 in a few
months
> > which WILL allow 2 simul G729 calls.
> >
> > -Matthew
> >
> > ----- Original Message -----
> > From: "Leonardo Gomes Figueira" <sabbath at planetarium.com.br>
> > To: "Asterisk Users Mailing List - Non-Commercial Discussion"
> > <asterisk-users at lists.digium.com>
> > Sent: Tuesday, February 01, 2005 12:21 PM
> > Subject: [Asterisk-Users] Linksys PAP2 / RT31P2 + multiple G.729 calls
> >
> >
> >> Hi,
> >>
> >> anyone can confirm if the Linksys's ATA and Router (PAP2-NA and
> >> RT31P2-NA) have the same limitation of just one G.729 call like the
> >> Cisco ATA 186 ?
> >>
> >> I'm testing both appliances here and found this issue but could not
> >> confirm this anywhere (nothing on the manual, no document or post from
> >> any user about this).
> >>
> >> In my tests they use G.729 only on the first call and G.711 on the
> >> others. If I disable G.729 on sip.conf for both peers they can't
> >> establish a second call (ring but drop after answer). If there is
> >> allow=ulaw on sip.conf I can establish 1 G.729 call and 3 G.711 with
> >> RT31P2-NA (using three-way calling).
> >>
> >> In PAP2-NA if I mark "Use Pref Codec Only" and there is one call
> >> established, when I call the PAP2 it replies with "488 Not Acceptable
> > Here".
> >>
> >> Thanks,
> >>
> >>      Leonardo
> >>
> >> --
> >>
> >>   Leonardo Gomes Figueira
> >>   sabbath at planetarium.com.br
> >> _______________________________________________
> >> Asterisk-Users mailing list
> >> Asterisk-Users at lists.digium.com
> >> http://lists.digium.com/mailman/listinfo/asterisk-users
> >> To UNSUBSCRIBE or update options visit:
> >>    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >   http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users