[Asterisk-Users] using a Gigaset SX440isdn on a Diva 4BRI ?

[Armin Schindler]

Please don't post your question on different mailinglist seperately.
I already answered that one on the isdn4linux list.

Armin

On Fri, 30 Dec 2005, Louis-David Mitterrand wrote:
> Hello,
> 
> I just received a couple SX440isdn phones and was wondering if they can
> be plugged into a Diva 4BRI port in NT mode and work with
> asterisk+chan_capi?
> 
> I know they probably work fine with mutliHFC cards with either bristuff
> of chan_misdn but since I have some spare Divas, I was curious about
> their potential as phone ports.
> 
> The Diva's 3 and 4 ports are already set to NT mode at boot time: 
> 
> 	/sbin/divactrl load -SeparateConfig -c 1 -f ETSI -f1 ETSI -f2 ETSI -u2 -x2 -f3 ETSI -u3 -x3
> 
> And I think the capi.conf (using Armin's 0.6.1 version) looks OK:
> 
> 	[DIVA2]
> 	ntmode=yes
> 	isdnmode=ptp
> 	incomingmsn=*
> 	controller=4
> 	group=3
> 	accountcode=diva
> 	context=international
> 	echosquelch=0
> 	echocancel=no
> 	devices=1
> 
> But when I plug the phone into port 3 or 4 no led lights up, even with a
> Y plug and when dialing I get a busy.
> 
> Before digging to deep, I am looking for some info on the feasability of
> that setup.
> 
> Thanks,
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>