[Asterisk-Users] CoreDump

[Markus Monka]

we have some problems with asterisk coredumping.

We are running 1.0.9 on an Linux Debian Sarge with 2.4.31 Kernel.
Inside is an wct4xxp (4 E1s).

We terminate: SIP => Asterisk => DSS1

(gdb) bt
#0  0x4052c831 in q921_transmit_iframe (pri=0x401e0938, buf=0xbe5ff444,
len=9, cr=1) at q921.c:384
#1  0x40532224 in q931_xmit (pri=0x401e0938, h=0xbe5ff444, len=9, cr=1)
at q931.c:1848
#2  0x40532401 in send_message (pri=0x401e0938, c=0x82b1b50, msgtype=77,
ies=0x4053e800) at q931.c:1888
#3  0x40532d83 in q931_release (pri=0x401e0938, c=0x82b1b50, cause=16)
at q931.c:2141
#4  0x40532b2d in pri_disconnect_timeout (data=0x82b1b50) at q931.c:2092
#5  0x4052e355 in __pri_schedule_run (pri=0x8185620, tv=0xbe5ff90c) at
prisched.c:97
#6  0x4052e3c0 in pri_schedule_run (pri=0x8185620) at prisched.c:109
#7  0x404f9d8d in pri_dchannel (vpri=0x4050f000) at chan_zap.c:7415
#8  0x400200ba in pthread_start_thread () from /lib/libpthread.so.0

is this a known problem and we should switch an other version?

best regards
Markus