[Asterisk-Users] PRI: This number has been disconnected

[Javier Ergas]

Hi,

 

I'm running Asterisk at home 1.5 with TE110P E1 PRI in Chile.

When calling an invalid number using, I expect to hear:

"We're sorry you have reached a number which has been disconnected ..."

And that is indeed what I hear when I dial out from [*] using analog FXO, or
VoicePulse or NuPhone.  When I dial that same number trough the T1 / PRI
interface however, I only hear the allison7/all-circuits-busy-now message.

 

There was another issue like this in an old post
(http://lists.digium.com/pipermail/asterisk-users/2004-April/043597.html)
but I think it isn't the same.

 

Any ideas??

 

Thanks,


Javier Ergas

CEO

Pibix.cl

 

Here is the trace from the Telcom:

 

PROTOCOL DISCRIMINATOR: 8 Q.931 USER-NETWORK CALL CONTROL MESSAGES

CALL REFERENCE LENGTH:2 FLAG:0(Orig) VALUE:418

M   0x05 SETUP  Length: 35

I   0x04 BEARER CAPABILITY Length: 3

3   0x80 Coding standard:      -00----- CCITT standard

         Inform.transf.cap.:   ---00000 speech

4   0x90 Transfer mode:        -00----- circuit mode

         Inform.transf.rate:   ---10000 64 kbits/s

5   0xA3 Layer 1 ident.:       -01----- 

         User info layer 1:    ---00011 recomm. G.711 A-law

I   0x18 CHANNEL IDENTIFICATION Length: 3

3   0xA9 Interface id. pres.:  -0------ interface implicitly identifier

         Interface type:       --1----- other interface (primary)

         Spare                 ---0---- 

         Preferred/exclusive:  ----1--- exclusive: only the indicated
channel is acceptable

         D-channel indicator:  -----0-- the channel identified is not the
D-channel

         Channel selection:    ------01 as indicated in following octets

3.2 0x83 Coding standard:      -00----- CCITT standard

         Number/Map:           ---0---- channel is indicated by number in
the following octet

         Channel type:         ----0011 B-channel units

         Channel number: Length: 1

           VALUE: 7

I   0x28 DISPLAY Length: 4

         Display information: Length: 4

           CONTENT: test

I   0x6C CALLING PARTY NUMBER Length: 6

3   0x21 Type of number:       -010---- national number

         Numbering plan id.:   ----0001 ISDN/Telephony numbering plan

3a  0x80 Presentation ind.:    -00----- allowed

         Spare                 ---000-- 

         Screening ind.:       ------00 user-provided, not screened

         CLI: Length: 4

           CONTENT: 9349

I   0x70 CALLED PARTY NUMBER Length: 8

3   0x80 Type of number:       -000---- unknown

         Numbering plan id.:   ----0000 unknown

         Called: Length: 7

           CONTENT: 2514990

I   0xA1 SENDING COMPLETE

1   0xA1 Info. el. id.:        10100001 

 

 

PROTOCOL DISCRIMINATOR: 8 Q.931 USER-NETWORK CALL CONTROL MESSAGES

CALL REFERENCE LENGTH:2 FLAG:1(Dest) VALUE:418

M   0x7D STATUS  Length: 9

I   0x08 CAUSE Length: 4

3   0x82 Coding standard:      -00----- CCITT standard

         Spare                 ---0---- 

         Location:             ----0010 public network serving the local
user

4   0xE3 Cause value:          -1100011 D 99: Information element
non-existent or not implemented

         Diagnostics: Length: 2

    98h 28h 

I   0x14 CALL STATE Length: 1

3   0x01 Coding standard:      00------ CCITT standard

         Call state/glob int:  --000001 call Initiated

 

 

PROTOCOL DISCRIMINATOR: 8 Q.931 USER-NETWORK CALL CONTROL MESSAGES

CALL REFERENCE LENGTH:2 FLAG:1(Dest) VALUE:418

M   0x02 CALL PROCEED  Length: 5

I   0x18 CHANNEL IDENTIFICATION Length: 3

3   0xA9 Interface id. pres.:  -0------ interface implicitly identifier

         Interface type:       --1----- other interface (primary)

         Spare                 ---0---- 

         Preferred/exclusive:  ----1--- exclusive: only the indicated
channel is acceptable

         D-channel indicator:  -----0-- the channel identified is not the
D-channel

         Channel selection:    ------01 as indicated in following octets

3.2 0x83 Coding standard:      -00----- CCITT standard

         Number/Map:           ---0---- channel is indicated by number in
the following octet

         Channel type:         ----0011 B-channel units

         Channel number: Length: 1

           VALUE: 7

 

 

PROTOCOL DISCRIMINATOR: 8 Q.931 USER-NETWORK CALL CONTROL MESSAGES

CALL REFERENCE LENGTH:2 FLAG:1(Dest) VALUE:418

M   0x45 DISCONNECT  Length: 12

I   0x08 CAUSE Length: 2

3   0x80 Coding standard:      -00----- CCITT standard

         Spare                 ---0---- 

         Location:             ----0000 user

4   0x81 Cause value:          -0000001 D 1:Unallocated number

I   0x1E PROGRESS INDICATOR Length: 2

3   0x82 Coding standard:      -00----- CCITT standard

         Spare                 ---0---- 

         Location:             ----0010 public network serving the local
user

4   0x88 Progress desc.:       -0001000 in-band information or appropriate
pattern now available

I   0x1E PROGRESS INDICATOR Length: 2

3   0x82 Coding standard:      -00----- CCITT standard

         Spare                 ---0---- 

         Location:             ----0010 public network serving the local
user

4   0x82 Progress desc.:       -0000010 destination address is non-ISDN

 

 

PROTOCOL DISCRIMINATOR: 8 Q.931 USER-NETWORK CALL CONTROL MESSAGES

CALL REFERENCE LENGTH:2 FLAG:0(Orig) VALUE:418

M   0x4D RELEASE  Length: 4

I   0x08 CAUSE Length: 2

3   0x81 Coding standard:      -00----- CCITT standard

         Spare                 ---0---- 

         Location:             ----0001 private network serving the local
user

4   0x81 Cause value:          -0000001 D 1:Unallocated number

 

 

PROTOCOL DISCRIMINATOR: 8 Q.931 USER-NETWORK CALL CONTROL MESSAGES

CALL REFERENCE LENGTH:2 FLAG:1(Dest) VALUE:418

M   0x5A RELEASE COM  Length: 0

 

 

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051227/053704b3/attachment.htm