[Asterisk-Users] Asterisk 1.2.1 and X100 clone Zap problem

[Todd Reese]

Hi all,

I have just installed Asterisk 1.2.1 on my server and I'm having a problem
with the X100 Zap channel.

The channel works for a while when I boot up the server and then degrades to
an garbled dial tone and speach.
Also this problem will appear when I reload the Asterisk config files.   My
SIP and IAX channels are working fine.

In the logs file I get

Dec 26 21:05:22 WARNING[2377] chan_zap.c: Ignoring signalling
Dec 26 21:05:22 WARNING[2377] chan_zap.c: Ignoring overlapdial

when reloading the configs and

Dec 26 21:05:41 NOTICE[2577] callerid.c: Caller*ID failed checksum
Dec 26 21:05:44 NOTICE[2577] chan_zap.c: Got event 18 (Ring Begin)...

when a call comes in on the Zap channel

At bootup of Asterisk, these do not appear in the logs, only after a reload


included  zapata.conf
[trunkgroups]

[channels]
language=en
context=incoming
signalling=fxs_ks
channel => 1
usecallerid=yes
echocancel=yes
musiconhold=default
immediate=no
overlapdial=yes
relaxdtmf=yes
echotraining=yes
rxgain=100%
txgain=50%


and  zaptel.conf

loadzone = us
defaultzone=us
fxsks=1


Any insight into resolving this would be appricated,

Regards,

Todd Reese
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051227/f42738ff/attachment.htm