[Asterisk-Users] Dialling out with clone X100P board

[burke at tailorhosting.com]

I had the same problem at first. Try adding a "w" or two before the
${EXTEN}. That makes it wait a little bit before sending the DTMF numbers.

Here is the dial() I'm using:

Dial(ZAP/1/ww${EXTEN})

Try it out and see. Let us know if it works.

Ryan

> Hi all :
>
> I need a little help please.
>
> I have a clone X100P board. I have it all set up and working (just
> testing so far) for incoming calls from PSTN.
>
> For outgoing to PSTN I have a strange problem.
>
> I dial out OK, the Zap channel answers the SIP channel ok, (But I do not
> see a Call bridged message, and the call has some strange charateristics.
>
> If I call 123, I can connect to and hear the time clock provided by BT
> (I'm in the UK) Is this 'audio before answer'?)
>
> If I call any other external number, eg my cellphone, it never rings,
> and after 30 secs or so the Zap channel hangs up.
>
> I have been testing this with a very simple Dial(ZAP/1/${EXTEN}) command.
>
> What should I be looking for in my setup?
>
> Many thanks, and happy Christmas to all.
>
> Roger
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>