[Asterisk-Users] asterisk AVM C2 again

[Armin Schindler]

On Fri, 23 Dec 2005, stéphane plichon wrote:
> Armin Schindler wrote:
> > On Thu, 22 Dec 2005, stéphane plichon wrote:
> > 
> >>Hi all, finally i think i find where is my trouble :-)
> >>
> >>i can't get the card fonctionning in P2P mode, actually i work in p2mp
> >>but i have only 2 Bchan. I think i forgot something (or definitly AVM C2
> >>does not work whith *)
> >>
> >>* 1.0.9
> >>chan_capi_cm 0.5.4
> >>
> >>the dial sttring for outbound call:
> >>_0X.,4,Dial(CAPI/g1/b${EXTEN}/bo)
> > 
> > 
> > This dial string does not make sense. With version 0.5.4 you use
> >   _0X.,4,Dial(CAPI/g1/b${EXTEN})
> > but for 0.6.x
> >   _0X.,4,Dial(CAPI/g1/${EXTEN}/bo)
> >  
> 
> > When using PtP, you need to set isdnmode=ptp (or isdnmode=did when using 
> > 0.6.x)
> > 
> > Read the README !
> > 
> > Armin
> > 
> > 
> upgrade to chan_capi-cm 0.6.1
> set /etc/capi.conf
> c2    c2.bin          DSS1    -       -       -       -       P2P
> C2    -               DSS1    -       -       -       -       P2P
> 
> update /etc/asterisk/capi.conf
> 
> 
> -- [general]
> nationalprefix=0
> internationalprefix=00
> rxgain=0.8
> txgain=0.8
> 
> [AVM1]
> isdnmode=did
> incomingmsn=9881
> controller=1
> group=1
> softdtmf=1
> accountcode=
> context=capi-in
> devices=2
> immediate=yes
> 
> [AVM2]
> isdnmode=did
> incomingmsn=9881
> controller=2
> group=1
> softdtmf=1
> accountcode=
> context=capi-in
> devices=2
> immediate=yes
> 
> 
> Not ok, outbound call stay on "Tut-tut...." and inbound call sound are
> ugly or blocked on ring. * work well when i put it in multipoint mode,
> but only 2 call at the same time.

Please create a verbose log of level 5 with 'capi debug'...

Armin