[Asterisk-Users] Emergency Information Needed: sip.conf -bindportallow multiple ports?

[rushowr]

BJ, 
Thank you. The only problem with the new versions is the occasional lack of
specific information on some of the minor and usually inconsequential
things. 

I'll get in touch with the client and have them just forward the ports,
since their router is not playing nice anyway.

SKM 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of BJ Weschke
Sent: Friday, December 23, 2005 1:50 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Emergency Information Needed: sip.conf
-bindportallow multiple ports?

On 12/23/05, rushowr <madprofzero at yahoo.com> wrote:
> Thanks,
>
> I'll probably be using this.
>
> Do you know if leaving out the setting will allow the *PBX to respond 
> on multiple ports? We use 5060 and 5061 for example.
>

 There's one call to bind one port.I believe it's listening on 0.0.0.0
unless you've told it otherwise, but that will not solve your problem to
have it listen on multiple different ports. To do that, you're going to need
to work some IP/network magic outside of Asterisk.

--
Bird's The Word Technologies, Inc.
http://www.btwtech.com/
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users