[Asterisk-Users] Emergency Information Needed: sip.conf -bindport allow multiple ports?

[rushowr]

Thanks,

I'll probably be using this.

Do you know if leaving out the setting will allow the *PBX to respond on
multiple ports? We use 5060 and 5061 for example.

Thank you 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of BJ Weschke
Sent: Friday, December 23, 2005 12:26 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Emergency Information Needed: sip.conf
-bindport allow multiple ports?

On 12/22/05, rushowr <madprofzero at yahoo.com> wrote:
> This is rather a bit of an emergency, sorry for the rush but, can 
> ANYONE tell me if 1.2.1 allows multiple ports in the general section 
> of sip.conf for bindport? Example:
>
> [general]
> bindport=5060,5061
>

 No. It doesn't. I think people have been creative enough to have done this
in the past though by mapping multiple ports to the one that is bound with
iptables or the like.

--
Bird's The Word Technologies, Inc.
http://www.btwtech.com/
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users